Panasonic PT-LB50E - Page 66

66-E
NGLISH
During RGB input/output:
R.G.B.: 0.7 V [p-p], 75 Ω
G.SYNC: 1.0 V [p-p], 75 Ω
HD, VD: TTL, automatic positive/negative polarity
compatible
During YPBP
R input/output:
Y: 1.0 V [p-p] (Including sync), 75 Ω
P
B, PR : 0.7 V [p-p], 75 Ω
VIDEO IN: Single-line, RCA pin jack, 1.0 V [p-p], 75 Ω
S-VIDEO IN: Single-line, Mini DIN 4-pin
Y 1.0 V [p-p], C 0.286 V [p-p], 75 Ω
AUDIO IN: Single-line, 0.5 V [rms] RCA pin jack x 2 (L-R)
PC AUDIO IN: Single -line, 0.5 V [rms] M3 jack (Stereo MINI)
VARIABLE AUDIO OUT: Single -line, 0.5 V [rms] M3 jack (Stereo MINI)
(Monitor output/stereo compatible)
0 V [rms] - 2.0 V [rms] (variable)
SERIAL: DIN 8-pin RS-232C compatible
Cabinet: Moulded plastic (PC/ABS)
Dimensions:
Width: 297 mm (11-11/16˝)
Length: 210 mm (8-1/4˝)
Height: 57 mm (2-7/32˝)(Not including the
projection parts)
Weight:
PT-LB50NTE: 1.9 kg (4.2 lbs.)
PT-LB50E/PT-LB50SE: 1.8 kg (4.0 lbs.)
Operating environment:
Temperature: 0 °C - 40 °C (32 °F - 104 °F)
[When the “HIGHLAND” is set to “ON”
(page 52): 0 °C - 35 °C (32 °F - 95 °F)]
Humidity: 20% - 80% (no condensation)
Certifications: EN60950, EN55022, EN61000-3-2,
EN61000-3-3, EN55024
<Remote control unit>
Power supply: 3 V DC (AAA battery x 2)
Operating range: Approx. 7 m (23´) (when operated directly
in front of signal receptor)
Weight: 74 g (2.6 ozs.) (including battery)
Dimensions:
Width: 51.5 mm (2´)
Length: 123 mm (4-13/16˝ )
Height: 21.1 mm (-13/16˝ )
<Options>
Ceiling bracket ET-PKB50
Wireless remote control unit ET-RM300
Serial adapter ET-ADSER
(DIN 8-pin/D-sub 9-pin)