Panasonic PV-20DF25 - Page 11

5.1.6. SERVICE POSITION
CAUTION:
1. HOT CIRCUIT (Primary circuit) exists on the Main
C.B.A.
Use extreme care to prevent accidental shock when
servicing.
2. Before connecting the AC plug, be sure to confirm the
connection between the Connector P502 on the
Deflection C.B.A. and P851/P852 on the Main C.B.A.
Otherwise, some electrical parts may be damaged due
to a sudden power surge.
5.1.6.1. How to obtain Service Position
for Combination TV/DVD models
To obtain these Service Positions, the 2 Extension Cables 13P
(LSUA0047) and 16P (LSUA0048) are necessary.
5.1.6.1.1. Service Position (1)
1. Remove the Rear Cover. Then, pull the DVD Ass´y out and
place it upright.
Fig. 6-1
5.1.6.1.2. Service Position (2)
1. Remove the Rear Cover. Then, turn the DVD Ass´y to the
right.
2. Connect the DVD Main C.B.A. using the Extension Cable
16P.
Fig. 6-2
5.1.6.1.3. Service Position (3)
1. Remove the Rear Cover. Then, pull out the DVD Ass´y.
2. Place the Deflection C.B.A. and the Main C.B.A. upright.
Then, connect them using the Extension Cable 13P.
Fig. 6-3
11
PV-20DF25 / PV-27DF25 / PV-27DF5 / PV-20DF25-K / PV-27DF25-K