Panasonic PV-C2541 - Page 29

d
«Important:
if a remote control button does not work when pressed, press the COMBO button
on the remote and try the button again.
SELECT/
SET
4:CH UP
v:CH DOWN
»:VOL UP
CVOL DOWN
POSITION
EH SEARCH
Auto Operation Functions
@ Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
> Power turns off — ..
* This feature is canceled if any button is
pressed during above mode.
BB Auto Playback
Insert a tape in Power off mode
3 Power turns on
e Playback begins if tape has no record tab.
@ Auto Rewind
Tape reaches its end
23 Rewind, 3 Stop
@ Playback Auto Eject (Repeat Play Is “OFF”)
Tape with no record tab reaches its end
3 Rewind, > Stop, 3 Eject
Tape Position Display
To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
Press TAPE POSITION
to detect current tape position.
*“DETECTING TAPE
perectino we position) POSITION” is displayed only
E when a cassette is first inserted
d and it takes several seconds for
correct tape position to appear.
«The present tape position
s| indication and amount of tape
aso | remaining (according to tape
speed) is displayed.
AE,
*Tape
remaining
time
display
may not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
e This function cannot display exact amount of
tape remaining for tapes 30 minutes or less,
or for tapes over 120 minutes in length.
29
uonelado pasgueapy