46
With the proper audio mode
setting, your unit can:
• Record and playback MTS stereo broadcast
(main language) in stereo Hi-Fi. Stereo sound is
recorded on the left and right audio tracks and
on the video portion of a tape.
• Record and playback a monaural broadcast
(main language) or SAP (Secondary Audio
Program, usually in a second language) on the
Hi-Fi tracks for better quality monaural sound.
• Playback non-Hi-Fi tapes in monaural.
Audio Mode for Playback
Choose the type of sound track for playback.
Choose audio mode to match recording type.
1
See the “Playback a Tape” section on page
20 to playback the tape.
• Only tapes recorded in Hi-Fi stereo will playback with true
stereo sound. Standard stereo tapes will playback with
monaural sound.
• To listen to Hi-Fi stereo playback, the unit AUDIO (L/R)
jacks must be connected to a stereo amp and speakers.
• There may be a difference in audio level between Hi-Fi
and normal audio playback.
2
• This screen appears when you press AUDIO during
playback.
Press AUDIO*
repeatedly
(each press
within 5 seconds) to
select desired mode.
H
I
F
I
(
L
/
R
)
H
I
F
I
(
L
)
H
I
F
I
(
R
)
N
ORM
AL
1
Press AUDIO repeatedly to select the audio
mode according to the type of broadcast to be
recorded.
• The Audio mode selected stays in effect until it is
changed.
See the “Record On a Tape” section on page
20 to do a recording.
2
Audio Mode for Recording
Audio Features
S
U
R
R
O
U
N
D
SELECT
SET
ACTION
MUTE
VOL +/-
SURROUND
AUDIO
Notes
• Select “HIFI (L/R),” to listen to a regular Hi Fi Stereo
recording.
Select “HIFI (L)” or “HIFI (R)” to listen only to the left or right
channel of a stereo recording. This is commonly used for
Karaoke, music on one channel and vocal on the other.
Select “NORMAL” for linear stereo playback from a
recorded tape with Hi Fi disabled.
To Next Page
Loading...
