Fig. D8
b. Make sure the phase hole of the Main Cam Gear on the bottom side of the Mechanism Unit is in EJECT Position.
Fig. D9
c. Install the Mechanism Chassis straight onto the Main C.B.A. so that the Sensor LED clears the hole in the Mechanism
Chassis and that 2 Connectors (P6201 and P4001) are aligned and seated securely.
6.2. MECHANISM SECTION
Refer to the Service Manual for R4-Mechanism Chassis. (Order No. MKE0401000C1)
25
PV-DF205 / PV-DF2035 / PV-DF275 / PV-DF2735 / PV-DF2035-K / PV-DF2735-K
To Next Page
Loading...
