64
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Select the digital output to be output from the
optical digital audio output connector of the
unit.
LPCM (DVD)
1 Press ACTION in Stop mode to
display MAIN MENU.
2 Press ▲▼◄ ► to select “DVD.”
3 Press SET to display DVD MAIN
MENU.
MAIN MENU
DVD LOCK LANGUAGE
TV CLOCK CH
SELECT: SET:SET
END :ACTION
DVD MAIN MENU
DISC LANGUAGES
AUDIO OUTPUT
STILL MODE :AUTO
TV MODE :4:3 Pan&Scan
SELECT :
SET :SET
END :ACTION
4 Press ▲▼ to select “AUDIO
OUTPUT.”
5 Press SET to display AUDIO OUTPUT
screen.
6 Press ▲▼ to select an item.
7 Press SET repeatedly for desired
output.
AUDIO OUTPUT
LPCM(DVD) :OFF
Dolby Digital :Bitstream
dts :Bitstream
DRC :OFF
SELECT :
SET :SET
END :ACTION
Dolby Digital
OFF:
Linear PCM of less than 48 kHz/16 bit is
output. When playing DVDs recorded in
linear PCM of over 48 kHz/20 bit, no
digital audio is output. (Factory preset)
PCM:
When playing DVDs recorded in linear
PCM of 48 kHz/20 bit/24 bit or more,
digital audio converted to 44.1 kHz/16 bit
or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted
to 48 kHz/16 bit or below for copyright
protection.)
Bitstream:
Dolby Digital bitstream (1ch-5.1ch) is
output. (Factory preset)
PCM:
When you have connected an amplifier
that doesn’t have a built-in Dolby Digital
decoder.
Selecting AUDIO OUTPUT
dts selections
Bitstream:
dts bitstream is output. (Factory preset)
PCM:
When you have connected an amplifier
that doesn’t have a built-in dts decoder.
SELECT
▲▼◄ ►
ACTION
DVD-V
SET
To Next Page
Loading...
