How to read chart shown above:
A: Order of steps in Procedure
When reassembling, perform the step(s) in the reverse order. These numbers are also used as
the identification (location) No. of parts in Figures.
B: Part to be removed or installed.
C: Fig. No. showing Procedure or Part Location.
D: Identification of part to be removed, unhooked, unlocked, released, unplugged, unclamped,
or unsoldered.
2(L-1)=2 Locking Tabs (L-1)
6.1.2.1. Front Case Unit
Fig. D2
31
To Next Page
Loading...
