Panasonic PV-DV950 - Powering the Camera; AC Power Supply

The
2 Types
of
Power
Supplies
1
) AC
Adaptor
(supplied) to
supply
power
from
an AC
Outlet
2)
Battery
(supplied)
(-»
12)
Supplying
Power
from an AC
Outlet
1 Slide the
[BATT
DOOR
OPEN]
Lever
upward
to open
the
Battery
Compartment
Cover.
2
Insert
the
battery-shaped
connector
of the
DC
Input
Cable
O
into the
Movie
Camera.
Pull back
the
Cover for
the
DC
Input
Cable Slot
©
and lift it. Pass
the DC Input
Cable
through the
slot
and close
the
Battery
Compartment
Cover.
3
Connect the
other end
of
the DC
Input
Cable to
the AC
Adaptor.
4
Connect the
AC
Power
Cord
to an AC
Outlet.
+
Before
disconnecting
the AC
Power
Cord, set
the
[POWER
ON/OFF]
Switch to
[OFF].
+
if you
use the
Movie
Camera
for
a
long time,
it
becomes
warm.
However,
this Is
normal.