Editing Mode
45
Editing Mode
A/V
[VIDEO IN]
[AUDIO IN]
1
Copying onto a DVD Recorder or
a VCR ( Dubbing)
Pictures recorded by the Camcorder can be stored
on a DVD-RAM or other such media. Refer to the
instructions for the recorder.
• Place a recorded cassette in the Camcorder,
and an unrecorded DVD-RAM or cassette in
the DVD Recorder or VCR.
1 Connect the Camcorder and the Recorder.
Connecting with the AV Cable
• Connect the Camcorder and the Recorder by
using the AV Cable
1
.
Connecting with the optional DV
cable (Only for equipment with a DV
terminal)
2 Turn on the Camcorder and set to Tape
Playback Mode.
3 Select the input channel on the TV set and
recorder.
4 Move the Joystick Control
[▲] to start playback.
• The image and sound are
reproduced.
[One-Touch Navigation icon]
5 Start recording.
6 Move the Joystick Control [▼] to stop
playback.
7 Stop recording.
• For more information, refer to the operating
instructions for your TV set and recorder.
When neither image nor sound from
the Camcorder is output to the TV set
• Check that the plugs are inserted as far as they
go.
• Check the [12bit AUDIO] settings.
• Check the connected terminal.
SP 3h59m59s29f
R 2:00
12:34:56AM
JAN 2 2006 100
Using the DV Cable for Recording
(Digital Dubbing)
Player/Recorder:
2 Insert the Cassette and set to Tape
Playback Mode.
Player:
3 Move the Joystick Control [▲] to start
playback.
Recorder:
4 Set [ ADVANCED] >> [ REC STDBY]
>> [YES], then move the Joystick Control
[▲] to select [ ].
• Recording starts.
By connecting this Camcorder with other digital video
equipment (such as another Camcorder of the same
format/model) that has a DV input/output Terminal,
and using a 4-pin to 4-pin DV Interface Cable
PV-DDC9 (optional)
1
, high quality images and
sounds can be dubbed in the digital mode.
• Set to Tape Playback Mode
(Player/Recorder)
1 Connect the Camcorder and digital video
equipment with the DV cable.
1
To Next Page
Loading...
