Others
57
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the Camcorder.
Confirmatory Indications
:
A cassette with the accidental erasure
prevention slider placed in the [SAVE]
position is inserted.
No cassette is inserted.
[--] /
:
The built-in battery is low. (p. 16)
:
The Warning/Alarm Indication appears
when you record yourself. Turn the LCD
Monitor towards the Viewfinder and
check the Warning/Alarm Indication.
:
No card is inserted.
END :
The tape came to the end during
recording.
:
The video heads are dirty. (p. 59)
Textual Indications
DEW DETECT/ EJECT TAPE:
Condensation has occurred. Take out the
cassette and wait for a while. It takes some time
until the cassette holder opens, but this is not a
malfunction. (p. 59)
TAPE END:
The tape came to the end during recording.
NEED HEAD CLEANING:
The video heads are dirty. (p. 59)
PUSH THE RESET SWITCH:
An irregularity in the equipment has been
detected. Press the [RESET] Button (p. 64). This
may solve the problem.
LOW BATTERY:
The Battery is low. Recharge it. (pp. 11~12)
NO TAPE:
No tape is inserted. (p. 14)
CHECK REC TAB:
You are attempting to record pictures on a tape
with the accidental erasure prevention slider
placed in the [SAVE] position.
You are attempting Audio Dubbing or Digital
Dubbing on a tape with the accidental erasure
prevention slider placed in the [SAVE] position.
WRONG TAPE FORMAT:
You are attempting to play back a tape section
that has been recorded with a different TV
system. This cassette is incompatible.
CLOSE CASSETTE DOOR:
The cassette cover is open. Close the cassette
cover. (p. 14)
COPY PROTECTED:
Images cannot be recorded correctly because
the medium is protected by a copy guard.
CARD ERROR:
The Card is not compatible with this Camcorder.
You are attempting to format a failed card.
It displays, when you attempt to insert the
incompatible card to Card Slot.
NO CARD:
No card is inserted.
CARD FULL:
Card does not have sufficient memory
remaining.
Select Picture Playback Mode and delete
unnecessary files.
NO DATA:
There are no recorded files on the card.
UNPLAYABLE CARD:
You are attempting to play back data not
compatible with this Camcorder.
FILE LOCKED:
You are attempting to erase protected files.
CARD LOCKED:
The write protection switch on the SD Memory
Card is set to [LOCK].
CHANGE MODE TO USE USB:
The USB Cable is connected to the Camcorder
in Card Recording Mode.
CANCEL MAGICPIX MODE:
You are attempting to select an item other than
[OFF] in [
SCENE MODE] during MagicPix
Mode.
DISCONNECT USB CABLE:
You are attempting to turn the Mode Dial in PC
Mode with the USB Cable connected to the
Camcorder.
You are attempting to record pictures on a
Tape/Card with the USB Cable connected to the
Camcorder.
PC DOES NOT SUPPORT USB2.0:
The Camcorder is connected to a personal
computer that does not support USB2.0.
CAN NOT USE USB:
You are connecting the USB Cable with the DV
Cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select an item other than
[OFF] in [
SCENE MODE] when the [AUTO/
MANUAL/FOCUS] Switch is set to [AUTO].
TURN OFF THE VIDEO LIGHT:
You are attempting to select an item in [
SCENE MODE] when Light is on.
REVERSE THE LCD MONITOR:
When the LCD Monitor is rotated by 180°
towards the lens, the brightness of the LCD
Monitor cannot be adjusted.
To Next Page
Loading...
