52
6 Click on [Audio Tuning Wizard...] in the
[Tools] menu to confi rm that equipment is
connected correctly.
7 Select [USB Video Device] in the [Camera]
menu.
Setting up the MSN Messenger
• For other information about Windows Messenger,
please refer to Help.
• When access is finished, close Windows
Messenger, then turn off the Camcorder. Finally,
disconnect the USB Cable.
• If the Camcorder is used as Web Camera
continuously for two hours, the communication
is automatically shut OFF. In this case, restart
Windows Messenger and set up the communication
again.
8 Select [DVC] in the [Microphone] menu.
2 Type in your Sign-in name and password.
• If you do not have your Sign-in name and
password, click [Get one here].
3 Please carefully read the displayed
contents and then proceed.
4 After the setup is completed, sign in and
start MSN Messenger.
5 Click on [Audio Tuning Wizard...] in the
[Tools] menu to confi rm that equipment is
connected correctly.
6 Select the microphone attached to the PC
in the [Microphone] menu.
7 Click [Web Camera Settings...] in the
[Tools] menu.
8 Confi rm that the [Panasonic DVC Web
Camera Device] is selected.
When starting the MSN Messenger for the first time,
its setup screen is displayed. (However, the screen
is not displayed if the MSN Messenger setup has
already been done.) For more details, please read
the corresponding Help file.
In the case of MSN Messenger 7.0
1 Click [Sign In].
To Next Page
Loading...
