40
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
With the proper audio mode
setting, your unit can:
• record and playback MTS stereo
broadcast (main language) in
stereo Hi-Fi. Stereo sound is
recorded on the left and right
audio tracks and on the video
portion of a tape.
• record and playback a monaural
broadcast (main language) or
SAP (Secondary Audio Program,
usually in a second language) on
the Hi-Fi tracks for better quality
monaural sound.
• playback non-Hi-Fi tapes in
monaural.
Select Audio Mode for Playback
Audio Features
Choose the type of sound track for playback.
Select Audio Mode for Recording
1
See the “Record On a Tape” section on page
14 to do a recording.
2
Choose audio mode to match recording type.
2
1
• This screen appears when
you press AUDIO during
playback.
Press AUDIO repeatedly
(each press within 5 seconds)
to select desired mode.
• Select “HIFI (L/R)”, “HIFI (L)”
or “HIFI (R)” to listen to
stereo recordings in stereo
sound. Select “NORMAL” for
monaural sound.
H
I
F
I
(
L
/
R
)
H
I
F
I
(
L
)
H
I
F
I
(
R
)
N
ORM
AL
Press AUDIO repeatedly
to select the audio mode according to the type of
broadcast to be recorded.
• The Audio mode selected stays in effect until it is
changed.
See the “Playback a Tape” section on page 14
to playback the tape.
• Only tapes recorded in Hi-Fi stereo
will playback with true stereo
sound. Standard stereo tapes will
playback with monaural sound.
• To listen to Hi-Fi stereo playback,
the unit AUDIO (L/R) jacks must be
connected to a stereo amp and
speakers.
• There may be a difference in audio
level between Hi-Fi and normal
audio playback.
Speaker ON/OFF System
1
2
3
4
Allows you to turn off the speaker of the unit when it
is connected to external audio equipment.
Press ACTION twice
to end setup.
M
A
I
N
M
EN
U
T
V
VCR
EX I T
C
L
OC
K
C
H
LANGUAGE
SET
:
ACT
I
O
N
SE
L
E
C
T
:
SELE
C
T
:
SET
:
END
:
ACT
I
O
N
SET
UP TV
LOCK
CA
PT
I
O
N
I
NP
U
T
SELE
C
T
:
T
UNER
V
I
D
E
O
A
D
J
U
ST
SET UP FM
SPE
AKER
:
ON
Press ACTION*
to display MAIN MENU.
1) Press
to select
“TV.”
2) Press ACTION to
display SET UP TV
screen.
1) Press
to select
SPEAKER.
2) Press
to set “ON” or
“OFF.”
• “OFF” ➔ MUTE and VOL + -
buttons do not fonction.
Notes
<For Model PV-C2081 only>
*
Important:
if a remote control button does not work
when pressed, press the COMBO button
on the remote and try the button again.
C2061- P40-41 audio/OSD 00.12.14, 5:33 PM40
To Next Page
Loading...
