1. This section describes procedures for checking the operation of
the major printed circuit boards and replacing the main
components.
2. For reassembly after operation checks or replacement, reverse
the respective procedures. / Special reassembly procedures are
described only when required.
3. Select items from the following index when checks or
replacement are required.
Content
- Checking Procedure for Main P.C.B.
2.1. Checking Procedure for Main P.C.B.
Step 1 : Remove the Battery Cover.
Step 2 : Remove all the screws.
Step 3 : Remove the rear cabinet as arrow shown.
3
To Next Page
Loading...
