Need help?Do you have a question about the Panasonic RP-BTS50E and is the answer not in the manual?
General| Type | In-ear |
|---|---|
| Wireless | Yes |
| Bluetooth | Yes |
| Bluetooth Version | 4.1 |
| Frequency Response | 20 Hz - 20 kHz |
| Charging Time | 1.5 hours |
| Microphone | Yes |
| NFC | No |
| Impedance | 32 Ohm |
Explains the IPX5 rating and water jet resistance capabilities of the unit.
Lists important warnings and precautions when using the unit near water.
Details the process of connecting the unit to a computer for battery charging via USB.
Explains how to turn the unit on by pressing and holding the power button.
Details the procedure to turn off the unit by pressing and holding the power button.
Guides users through the first-time connection and pairing process with a Bluetooth device.
Explains how to connect to previously paired or new Bluetooth devices after the initial setup.
Provides instructions on how to adjust the earphone clips for a comfortable and secure fit.
Explains how to play music after connecting to a Bluetooth device using A2DP/AVRCP profiles.
Details how to use the unit's buttons to control music playback and manage calls.
Describes how to use the earphones for phone calls using HSP and HFP Bluetooth profiles.
Explains how to answer, reject, and end incoming and outgoing phone calls using the unit.
Details call management features like switching calling devices and adjusting volume during calls.
Describes how to turn the LED illumination on/off and its effect on battery life.
Explains how to reset the unit to its factory default settings.
Details the automatic power-off function that activates after a period of inactivity.
Explains how the LED indicator changes to signal a low battery status.
Guides users on how to reset the unit to its original factory default settings.
Provides instructions for cleaning the unit and maintaining battery performance during long periods of disuse.
Outlines copyright details and trademark acknowledgments for Bluetooth and other systems.
Covers safety guidelines for using the unit, earpieces, and avoiding allergic reactions.
Advises on safe listening volumes, use while operating vehicles, and environmental considerations.
Presents compliance information, including DoC, Singapore IDA, and Thailand NBTC requirements.
Explains Bluetooth frequency band, usage restrictions, interference, and unit certification.
Details the operating range, potential interference sources, and intended general use of the unit.
Lists general specifications like power, charging, operating temp, and Bluetooth system details.
Details specifications for speaker drivers, terminal connections, microphone type, and accessories.
Addresses problems with the unit not responding, charging, or turning on.
Covers troubleshooting for charging problems, LED indicators, and power not turning on.
Provides solutions for Bluetooth pairing failures and connection problems.
Offers fixes for no sound, low volume, and sound cut-off or poor audio quality.
Provides guidance for issues where the other person cannot be heard during phone calls.
Details the procedure for removing the battery for disposal, including safety warnings and dangers.
Provides information on proper disposal of old equipment and batteries, especially for EU countries.
To Next Page