Panasonic RP-BTS50E - Listening to Music; Playing Music via Bluetooth; Remote Control Operations; Music and Call Controls

5
■
Note
• M-size earpieces are attached at the time of purchase. If they are not the right
size, replace them with S or L-size earpieces (supplied).
■
Attention
• Do not bend the clip more than necessary. The clip can not be adjusted if it is
damaged.
Listening to music
If the Bluetooth
®
compatible device supports the “A2DP” and “AVRCP” Bluetooth
®
profiles, music can be played back with remote control operations on the unit.
• A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
• AVRCP (Audio/Video Remote Control Profile):
Allows remote control of the device using the unit.
1
Connect the Bluetooth
®
device and the unit (→ P. 4)
2
Select and play the music on the Bluetooth
®
device
• The selected music is output to the earphones of the unit.
Operating time of battery
Battery type Operating time
Rechargeable battery (installed in the unit) Approx. 6 hours
Operating time may be less depending on the operating conditions.
■
Attention
• The unit might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound
distorted. Decrease the volume until the distortion is cleared.
Remote controlling
You can control the Bluetooth
®
device using the unit.
• Depending on Bluetooth
®
devices, some functions below do not work, or work
differently via operation of the unit.
(Operation example)
Play/Pause/Call
Press Play/Pause/Call
Press twice
quickly
Reject the
incoming call/
Switch the
calling device
Previous/Next/Volume
+
Press
Increase the
volume
Press and hold
Forward to the
start of next track
−
Press
Decrease the
volume
Press and hold
Return to the
start of current
track
Remote controller
Volume +/Next
Volume –/
Previous
Play/Pause/Call
■
Note
• The volume can be adjusted in
15 levels.
When the maximum or minimum
volume is reached, a beep will
sound.
Making a phone call
With Bluetooth
®
enabled phones (cell phones or smartphones) that support the
“HSP” or “HFP” Bluetooth
®
profile, you can use the unit for phone calls.
• HSP (Headset Profile):
This profile can be used to receive monaural sounds and establish two-way
communication using the microphone on the unit.
• HFP (Hands-Free Profile):
In addition to the HSP functions, this profile has the incoming and outgoing calls
function.
Operation