Panasonic RQ-E25V - Advanced Radio Features; Hold Function Operation; Preset Station Tuning and Recall

CERE
'
Concerning
the
hold
function
RADIO
:
This function prevents the unit from During hold state If a button is pressed...
operating even if one of the front panel
buttons is pressed in error.
(wd) »
To obtain better reception
How to receive an FM
broadcast clearly
Set [FM RECEPTION] to [NOR].
When FM reception is impaired or
there is interference from a powerful
~~ ss oe station, set it to [CITY].
FM:
Extend the headphone
cord.
AM: Try various directions for opti-
mum receptions.
<>
Preset tuning
Frequencies of up to 20 radio stations B Memory presetting
(10 each for AM and FM) can be 1. Tune in the station to be stored.
stored
in
the
memory.
2.
Press
and
hold
one
of
the
memory
MODE
1:
FM
1-5,
AM
1-5
buttons
({[1},
[2],
[3],
[4],
[5])
for
MODE 2: FM 1-5, AM 1-5 about 2 seconds.
We recommend that you use MODE 1
for daily use, and MODE 2 for travel.
B Mode selection
Press and hold [PAM/FM/OFF, «MODE
ag/ag | for more than 2 seconds. " ag "
(MODE 1) or “a8” (MODE 2) is show on
the display.
Memory channel
3 beeps can be heard.
To recall a preset station
Press one of the memory buttons
((1], [2], (3), 4), (5).
t «Release the memory button within 2
seconds.
, When using overseas
' The allocation settings according to B How to adjust the alloca-
the area are needed. A different allo- tion settings
cation can be selected for each mode. While playing the radio
, , 1. Press and hold [eAM/FM/OFF,
, Every time the following procedure is «- MODE aD/aB | to select the
: performed, the allocation setting mode (MODE1 or MODE2).
r Ranges RS TON QW 2. Press and hold [i] and
: [ePAM/FM/OFF, « MODE at/ag] at
| FMO2 MHz, AM 10 kHz the same time for about 3 seconds.
(original setting) eThe changed allocation settings
f (FM and then AM) are displayed.
. .. FM0.1 MHz, AM 10 kHz Note:
i l Changing allocation settings erases
FM 0.05 MHz, AM 9 kHz the stations stored in the memory
mode currently selected.