To Next PageTo Next PageWhy is my Panasonic Air Conditioner not cooling properly?
Poor cooling or heating performance in your Panasonic Air Conditioner can occur if the air intake or discharge port of the indoor and outdoor units is blocked by dust or other obstructions. To resolve this, remove any dust or obstructions. Also, check if the fan speed is set to 'Low'; if so, change it to 'Medium' or 'High'.
What to do if my Panasonic S-140PU2E5B Air Conditioner won't turn on?
If your Panasonic Air Conditioner does not run even when the power is on, it could be due to a power failure. Press the ON/OFF operation button on the remote controller again. Alternatively, the operation button might be turned off; switch on the power if the breaker is off. However, if the breaker has tripped, it's important to consult your dealer without turning it back on. A blown fuse could also be the cause, and in that case, you should consult your dealer as well.
What to do if my Panasonic Air Conditioner is dirty because of oil mist?
If your Panasonic Air Conditioner is installed in a restaurant or a place with a lot of oil mist, the unit inside (heat exchanger) may get dirty. In this case, cleaning is necessary. It is suggested to contact your dealer.
Why does the fan keep running after I turn off my Panasonic S-140PU2E5B Air Conditioner?
If the fan in your Panasonic Air Conditioner continues to run even after you've turned it off, this is normal and intended for smooth operation.
General| Brand | Panasonic |
|---|---|
| Model | S-140PU2E5B |
| Category | Air Conditioner |
| Language | English |
Provides fields for model, serial number, purchase date, dealer info.
Refers to installation instructions for refrigerant details.
Proper installation by qualified technicians and voltage check.
Conformance to local codes and proper grounding by electrician.
Turn power on 5 hours before operation for warm-up.
Avoid blocking intake/outlet, keep filter clean, keep doors/windows closed.
Identifies components of the 4-Way Cassette (Type U2) indoor unit.
Shows different outdoor unit models and their air intake/outlet.
Displays various remote controller models available.
Instructions on cleaning the air filter using a soft cloth.
Explains heating performance, defrosting, and "DRY" operation modes.
Covers noise, odor, dewdrops, fog, and fan rotation problems for indoor units.
Addresses airflow direction, dust discharge, and initial fan speed variations.
Details troubleshooting for no operation, outdoor unit noise, steam, and fan stopping.
Troubleshoots issues when the unit does not respond to power.
Addresses poor cooling or heating performance by checking various factors.
Lists specifications for the 4-Way Cassette (Type U2) indoor units.
Details specifications for Single Split Outdoor Units (R410A) in Europe and Oceania.
Lists specifications for Single Split Outdoor Units using Refrigerant R32.
