17
ENGLISH
8. HOW TO INSTALL WIRELESS REMOTE
CONTROLLER RECEIVER
N OT E
Refer to the Operating Instructions attached to the optional Wire-
less Remote Controller Receiver.
9. APPENDIX
■ Care and Cleaning
CAUTION
Switch off the power supply before
cleaning.
CLEANING INSTRUCTIONS
● Donotusebenzene,thinnerorscouringpowder.
● Use only soap (
pH7) or neutral household detergent.
● Donotusewaterhotterthan40°C.
N OT E
● Clean the filter regularly for best performance and to reduce
power consumption.
● Please consult your nearest dealer for seasonal inspection.
Remove Air Filter
OPE
N
C
LOSE
CLOSE
OPE
N
INDOOR UNIT
Wipe the unit gently
with a soft, dry cloth.
AIR FILTER
Vacuum,washanddry.
1 Remove the 2 screws with phillips head screwdriver.
Then slide the knob to the OPEN side.
2 Slowly pull
down the intake
grille.
3 Remove the air filter
from the tabs and
pull it downwards.
Remove
Air Filter Installation
1
2
3
Insert the air filter
to the tabs of the
intake grille.
Slowly bring
up the intake
grille.
Knob
Slide the knob to the CLOSE side.
Then fix the knobs with screws.
ex.)Timer Remote Controller (Optional parts)
■ Air Filter Maintenance
It is recommended that the air filter be cleaned when
the
(Filter) appears on the display.
Clean the filter frequently for best performance in the
area of dusty or oil spots regardless of filter status.
■ After Cleaning
1. After the air filter is cleaned, reinstall it in its
original position.
Be sure to reinstall in reverse order.
2. Press the Filter reset button.
The
(Filter) indicator on the display goes out.
Filter indicator
Filter reset button
Pana_indoor_F616379_L.indb 17 2014-9-17 11:19:17
www.ampair.co.uk | sales@ampair.co.uk