1-1-1-1-2
11
Single-Type
1-1. Unit Specications
PZH2
Ducted Type S-160PE1R5B / U-160PZH2R5
INDOOR MODEL S-160PE1R5B - -
PANEL MODEL - - -
OUTDOOR MODEL - U-160PZH2R5 -
Branch pipe MODEL -
Performance test condition ISO13253 / AS / NZS3823.1
Power supply
ø, Hz 1ø 50Hz 1ø 50Hz -
V - 230V 240V - 230V 240V Min Max
C
O
O
L
I
N
G
Capacity
kW - 16.0 16.0 - - - 5.5 18.0
BTU/h - 54600 54600 - - - 18800 61400
Current A - 2.62 2.70 - 20.0 18.9 - -
Input power
W - 590 640 - 4.320k 4.270k - -
TOTAL W - - 4.910k 4.910k 1.550k 6.000k
Annual consumption
TOTAL kWh *4 - - - - 2455 - - -
EER/AEER/STR RAT
TOTAL (W/W) - - - - 3.26/3.18/- 3.26 3.55 3.00
Power factor % - - - - 94 94 - -
Noise indoor
dB-A (H/M/L) 51/49/47 - - -
Power Level dB 73/71/69 - - -
Noise outdoor
dB-A (H/L) - 58/- - -
Power Level dB - 76/- - -
H
E
A
T
I
N
G
Capacity
kW - 18.0 18.0 - - - 5.5 20.0
BTU/h - 61400 61400 - - - 18800 68200
Current A - 2.62 2.70 - 21.1 20.0 - -
Input power
W - 590 640 - 4.560k 4.510k - -
TOTAL W - - 5.150k 5.150k 1.250k 6.200k
COP/ACOP/STR RAT TOTAL (W/W)*5 / ("A"~"G")
- - - - 3.50/3.42/- 3.50 4.40 3.23
Power factor % - - - - 94 94 - -
Noise indoor
dB-A (H/M/L) 51/49/47 - - -
Power Level dB 73/71/69 - - -
Noise outdoor
dB-A (H/L) - 60/- - -
Power Level dB - 78/- - -
EXTRA LOW TEMP
Total capacity(kW)/Input power(W)/COP
- -
Max Current(A) / Max Input power(W) - 2.90/660 3.00/710 - 29.0/6.27k 29.0/6.54k -
Starting current(A) (Cooling/Heating) - - - - 20.0/21.1 18.9/20.0 -
Comp output(W) - - 3.80k 3.80k -
Time Delay fuse max size(A) 5 40 -
Network Impedance (Ω MAX.) - - -
Fan motor output (Indoor/Outdoor) W 440 120 × 2 -
Moisture removal volume L/h(Pt/h) 9.0 (9.0×1) (18.9) - -
External static pressure Pa 100 (MAX 150) - -
Indoor
Air ow
Cooling m
3
/min (m
3
/h) (H/M/L) 60.0/50.0/42.0 (3600)/(3000)/(2520) - - -
Heating m
3
/min (m
3
/h) (H/M/L) 60.0/50.0/42.0 (3600)/(3000)/(2520) - - -
Outdoor
Air ow
Cooling m
3
/min (m
3
/h) - 164 (9840) - -
Heating m
3
/min (m
3
/h) - 164 (9840) - -
Refrigerant type / amount
g
(oz) - R32 3.20k (112.9) - -
Product dimension
Height mm (inch) 430 (16-15/16) 1500 (59-1/16) -
Width mm (inch) 1100 (+100) (43-5/16 (+3-15/16)) 980 (38-37/64) -
Depth mm (inch) 700 (27-9/16) 370 (14-9/16) -
Product dimension (Panel)
H×W×D mm, inch - - - -
Packing dimension
Height mm (inch) 515 (20-9/32) 1642 (64-41/64) -
Width mm (inch) 1315 (51-25/32) 1095 (43-7/64) -
Depth mm (inch) 812 (31-31/32) 529 (20-53/64) -
Weight
(NET) k
g
(lb) 53 (117) 117 (258) -
(GROSS) k
g
(lb) 61 (134) 129
(284) -
Panel (NET)
k
g
(lb) - - - -
Layers limit (actually) 6 (7) 1(2) -
Operation condition
Cool (DBT) 18°C ~ 32°C -15°C ~ 46°C -
Heat (DBT) 16°C ~ 30°C -20°C ~ 24°C -
Max Working Pressure HP/LP Mpa (bar) 4.15/2.70(41.5/27.0) -
P
I
P
I
N
G
Pipe port diameter mm (inch) (Liquid)Ø9.52(3/8) (Gas)Ø19.05(3/4) (Liquid)Ø9.52(3/8) (Gas)Ø19.05(3/4) -
Pipe diameter mm (inch) (Liquid)Ø9.52(3/8) (Gas)Ø19.05(3/4) -
Standard length m(ft)
7.5 (24.6)
-
Connecting method (Liquid)ared type (Gas)brazing connection (Liquid)&(Gas) ared type -
Pipe length range m (ft) 5 ~ 75m (16.4 ~ 246.1) -
Indoor unit & Outdoor unit height difference m (ft)
30m (OD located lower) / 30m (OD located higher) (98.4/98.4) -
Add gas amount
g
/m (oz/ft) 45
g
/m (0.484) -
Pipe length for additional gas m (ft) 30m (98.4) -
*1 In case it is necessary to indicate the air ow volume in (l/s), the value in (m³/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 If the EUROVENT Certied models can be operated under the "extra-low" temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230V shall be used.
*3 Network Impedance shall be applicable for EUROPE and CHINA models.
*4 The annual consumption is calculated by multiplying the input power at 230V(400V) by an average of 500 hours per year in cooling mode.
*5 EER and COP classication is at 230V(400V) only in accordance with EU directive 2002/31/EC.
SM830277-00_大洋州向け R32シングル_TD&SM.indb 2 2019/02/27 11:50:27
To Next Page
Loading...
