What causes outdoor high pressure switch disconnect abnormality in Panasonic S-22KA1E5S Air Conditioner?
If your Panasonic Air Conditioner displays an outdoor high pressure switch disconnect abnormality, check the connector connection, the outdoor unit high pressure switch, and the outdoor unit PCB.
What causes low pressure protection in a Panasonic Air Conditioner and how to fix it?
To resolve low pressure protection for your Panasonic Air Conditioner, check for these potential issues: a clogged air filter of the indoor unit, dust accumulation, air short circuit, the 3-way valve, a faulty outdoor unit fan motor, refrigerant shortage, a clogged expansion valve or strainer, a faulty outdoor unit low pressure switch, or a faulty outdoor unit PCB.
What causes total current protection in Panasonic S-22KA1E5S Air Conditioner?
If your Panasonic Air Conditioner displays a total current protection error, it could be due to excess refrigerant or a faulty outdoor unit PCB. Check these components to resolve the issue.
How to fix IPM temperature protection error in Panasonic Air Conditioner?
If your Panasonic Air Conditioner shows IPM temperature protection, check for an air short circuit at the outdoor unit, a faulty outdoor unit fan motor, or a faulty outdoor unit PCB.
What causes outdoor current transformer open circuit in Panasonic S-22KA1E5S?
If your Panasonic Air Conditioner displays an outdoor current transformer open circuit, check if the CT is defective, the outdoor unit PCB is faulty, or the compressor is defective.
What causes outdoor address double registration error in Panasonic S-22KA1E5S?
To resolve an outdoor address double registration error on your Panasonic Air Conditioner, check for a wrong outdoor unit address setting or a faulty outdoor unit PCB.
What causes indoor heat exchanger temperature sensor error in Panasonic S-22KA1E5S?
To troubleshoot an indoor heat exchanger temperature sensor error in your Panasonic Air Conditioner, check the indoor heat exchanger temperature sensor lead wire, the indoor unit main PCB, and connector CN-TH1.
What causes indoor address double registration error in Panasonic Air Conditioner?
To resolve an indoor address double registration error on your Panasonic Air Conditioner, check the indoor unit address.
What to do if the outdoor fan motor mechanism is locked in my Panasonic S-22KA1E5S Air Conditioner?
If your Panasonic Air Conditioner displays an outdoor fan motor mechanism locked error, check for a short circuit inside the fan motor winding, a broken wire inside the fan motor, broken fan motor lead wires, a fan motor Hall IC malfunction, or a faulty outdoor unit PCB.
What does DC peak current detection mean on a Panasonic Air Conditioner?
If your Panasonic Air Conditioner displays a DC peak current detection error, check for a faulty outdoor unit PCB or a faulty compressor.
Detailed explanation of the functions and buttons of the wired remote control CZ-RT1.
Explanation of the functions and buttons of the wireless remote control CZ-RWS1/CZ-RWC1.
Charts showing capacity correction factors based on equivalent pipe length and height difference.
Installation instructions for the Cooling/Heating Selector CZ-RD1 module.
Instructions for installing and operating the wireless remote control CZ-RWS1/CZ-RWC1.
Installation notes and procedures for the wired remote control CZ-RT1.
Precautions and procedure for performing test runs on the outdoor unit.
Checks to be performed after installation completion and handover procedures.
Criteria for determining outdoor unit operation mode based on indoor unit settings.
Operation of Deice Control during heating under low outdoor ambient conditions.
Protection control for outdoor heat exchanger temperature during cooling and heating.
Protection control for indoor heat exchanger temperature during cooling and heating.
Control to manage compressor discharge temperature at alert levels.
Protection control for low outdoor ambient temperature during cooling.
Thermostat and expansion valve control for cooling operations.
Thermostat and expansion valve control for soft dry operation mode.
Thermostat and expansion valve control for heating operations.
Control to prevent freezing of the indoor unit heat exchanger.
Control to prevent dew formation on the indoor unit.
Control to prevent mist formation on the indoor unit.
Functionality for automatic restart after power interruption.
Procedure for performing emergency operation when the remote control is unavailable.
How to enter and configure settings on the outdoor unit's main PCB.
How to configure settings using the wired remote control's local setting mode.
How to configure settings using the wireless remote control's local setting mode.
A table listing outdoor unit error codes, abnormality controls, and areas to verify.
Flowcharts for diagnosing and resolving specific malfunction codes.
Exploded views and parts lists for various indoor unit series.
General| Cooling Capacity | 2.2 kW |
|---|---|
| Heating Capacity | 2.5 kW |
| SEER | 6.1 |
| SCOP | 4.0 |
| Energy Efficiency Class (Cooling) | A++ |
| Energy Efficiency Class (Heating) | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Weight | 9 kg |
| Type | Split |
| Noise Level (Indoor) | 20 dB(A) |
To Next Page