To Next PageTo Next Page
Why won't my Panasonic Air Conditioner turn on immediately?
When power is turned ON instantly, operation is not activated for the first approximately 3 minutes because the compressor protection circuit is activated.
Why does my Panasonic S-22MK2E5A Air Conditioner smell?
The discharged air may smell during operation because of indoor odor components, cigarette odor, and cosmetic odor accumulated in the air conditioner. Alternatively, the unit inside may be dusty.
Why is my Panasonic Air Conditioner making noise?
Your Panasonic Air Conditioner might be making noise due to several reasons: * The sound of refrigerant liquid flowing inside the unit, which sounds like streaming water during or after operation. * The sound of drainage water through the drain pipe, also sounding like streaming water during or after operation. * Cracking sounds due to temperature changes of parts, which you may hear during operation or when the operation stops.
Why does the fan keep running after I turn off my Panasonic S-22MK2E5A Air Conditioner?
The fan may continue to rotate after the Panasonic Air Conditioner is turned off to ensure smooth operation or to dry the heat exchanger due to specific settings.
Why won't the wind direction change on my Panasonic Air Conditioner?
The wind direction on your Panasonic Air Conditioner might change automatically or be unchangeable because when the air discharge temperature is low, or during defrost operation, horizontal wind flow is made automatically. Also, the flap position may occasionally be set up individually.
Why is my Panasonic S-22MK2E5A noisy in heating mode?
Noise often occurs in heating mode during defrost operation.
Why does the outdoor fan on my Panasonic S-22MK2E5A keep running after I turn it off?
The outdoor unit fan may continue to operate for a while after the Panasonic Air Conditioner is turned off via remote to ensure smooth operation.
Why is there condensation (dewdrop) near the air discharge of my Panasonic S-22MK2E5A?
Dewdrop can accumulate near the air discharge during operation because indoor moisture is cooled by the cool wind and accumulated as dewdrop.
Why does the flap on my Panasonic S-22MK2E5A move several times when I change the wind direction?
When the wind direction is changed, the flap operates after searching for a standard position, which is why it moves several times before stopping at the designated position.
General| Brand | Panasonic |
|---|---|
| Model | S-22MK2E5A |
| Category | Air Conditioner |
| Language | English |
Lists various indoor unit models like Wall Mounted and 4-Way Cassette.
Lists various outdoor unit models like mini and 2WAY types.
Guidelines for safe and proper installation placement.
Details on grounding, wiring, and power supply.
Critical warnings regarding refrigerant, flammables, and electrical hazards.
Cautions for users regarding operation, cleaning, and potential injuries.
Specifies the operating temperature ranges for cooling and heating modes.
Identifies parts of the Y2 and K2 type indoor units.
Introduces wireless and wired remote controller types.
Explains the operations and buttons of the timer remote controller.
How to set the flap position and activate swing operation.
Method to stop the automatic airflow swing at a desired position.
Details airflow control for cassette and wall-mounted units.
Guide to controlling airflow for multiple indoor units with one controller.
Details on DRY mode, heating performance, and defrosting.
Safety measures and general cleaning guidelines for the unit.
How to clean air intake, outlet, and fins of the indoor unit.
Specific cleaning agents, front panel, and air filter maintenance.
Common indoor unit issues like noise, odor, and fog with their causes.
Common outdoor unit issues like no operation, noise, and steam with their causes.
Steps to verify before contacting a dealer for service.
Advice on maintaining airflow, cleaning filters, and closing openings.
Technical data for Wall Mounted K2 type units.
Technical data for 4-Way Cassette Y2 type units.
Technical data for Mini LE1 single-phase units.
Technical data for Mini LE1 three-phase units.
Technical data for 2WAY ME1 type units.
