EasyManua.ls Logo

Panasonic S-26PU2U6 - User Manual

Panasonic S-26PU2U6
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
F569999
Operating Instructions
Air Conditioner
Model No.
This air conditioner uses the refrigerant R410A.
Before operating the unit, read these operating instructions thoroughly and keep them for future reference.
Indoor Units
26 36 42
Nominal Capacity
T2
* Panel (optional parts)
Type T2Type U2
Ceiling
Indoor Unit TypeType
S-26PT2U6 S-36PT2U6 S-42PT2U6
S-26PU2U6
(CZ-36KPU3U)*
S-36PU2U6
(CZ-36KPU3U)*
S-42PU2U6
(CZ-36KPU3U)*
U2 4-Way Cassette 36" x 36"
Outdoor Units
26 36 42 Remarks
Nominal Capacity
Outdoor Unit TypeType
U Single
U-42PE1U6U-26PE1U6 U-36PE1U6 Cooling/Heating
Connectable outdoor unit lineup
This booklet is the operating instructions for indoor unit. Regarding the outdoor unit, see the operating
instructions supplied with the outdoor unit.

Other manuals for Panasonic S-26PU2U6

Questions and Answers

  • P
    Peter MontgomeryAug 13, 2025
    What to do if my Panasonic S-26PU2U6 Air Conditioner does not run at all?
    • J
      Jeremy LewisAug 13, 2025
      If your Panasonic Air Conditioner isn't running, there are several possible causes. First, check for a power failure and restore power if necessary. Ensure the operation button is turned on by pressing it again. Also, replace the batteries in the wireless remote controller if they have run down.
  • T
    Thomas YatesAug 16, 2025
    Why is my Panasonic S-26PU2U6 Air Conditioner cooling (or heating) poorly?
    • B
      Billy BrowningAug 17, 2025
      Poor cooling or heating performance in your Panasonic Air Conditioner can stem from several issues. Start by cleaning the air filter to improve airflow. Make sure doors and windows are shut to keep heat or cold out. Also, remove any obstacles near the air intake or discharge port to ensure good airflow. Adjust the thermostat to a lower temperature for cooling or a higher temperature for heating. If there is a heat source in the room, try to eliminate it.
  • T
    Travis DonovanAug 20, 2025
    What to do if the compressor runs but soon stops in my Panasonic S-26PU2U6?
    • A
      aliciaowensAug 20, 2025
      If the compressor in your Panasonic Air Conditioner runs briefly and then stops, there might be an obstruction in front of the condenser coil (Outdoor Unit). Remove any obstruction that you find.
  • L
    Lisa MeltonAug 25, 2025
    Why is my Panasonic S-26PU2U6 Air Conditioner making noise?
    • J
      John TaylorAug 25, 2025
      The noise could be the sound of refrigerant liquid flowing inside the unit or the sound of drainage water moving through the drain pipe. It could also be a cracking sound caused by temperature changes of parts.
  • J
    Jessica HudsonAug 27, 2025
    Why does the wind direction change on my Panasonic Air Conditioner?
    • A
      Anthony VincentAug 28, 2025
      The wind direction may change automatically when the air discharge temperature is low, or during defrost operation. Also, the flap position is occasionally set up individually.
  • Z
    Zachary HaynesAug 31, 2025
    Why does the flap operate several times when I change the wind direction on my Panasonic S-26PU2U6?
    • L
      Lisa DiazSep 1, 2025
      When the wind direction is changed, the flap operates to search for a standard position.
  • G
    ghughesSep 4, 2025
    Why is there dewdrop forming on my Panasonic S-26PU2U6 Air Conditioner?
    • B
      bradley66Sep 4, 2025
      Dewdrop occurs because indoor moisture is cooled by cool wind and accumulates.
  • A
    alan55Sep 8, 2025
    Why is my Panasonic Air Conditioner emitting dust?
    • J
      Jordan LloydSep 8, 2025
      The dust emission is due to dust accumulation inside the indoor unit being discharged.

Panasonic S-26PU2U6 Specifications

General IconGeneral
RefrigerantR410A
TypeSplit System
HSPF Rating9.0
Cooling Capacity26000 BTU/h
Seasonal Energy Efficiency Ratio (SEER)16.0
SEER Rating16.0

Related product manuals