Mini VRF SYSTEM
Remote Controller Functions
5 - 18
3. Remote Controller Servicing Functions
5
<Function of CZ-RTC5A / CZ-RTC5B>
Display of "maintenance function" screen
1
Keep pressing the , and
buttons simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.
2
Press the or button to see each
menu.
If you wish to see the next screen instantly, press
the or button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [] Confirm
20:30 (THU)
List of Servicing Functions
Functions Description Menu selection Reset operation Unit status
Press the
button.
Press the
button.
ECONAVI
・CZ-KPU3A
・CZ-CENSC1
Display from each sensor 0. ECONAVI info.
Test run
Operation with forced
thermostat ON
4. Test run
Sensor temperature
display
Temperature display from
each sensor
5. Sensor info
Press the
button.
(Restart)
2WAY SYSTEM
Remote Controller Functions
3. Remote Controller Servicing Functions
Filter lifetime, operating
mode priority, central control
address, and other settings
Simple settings 7. Simple settings
System address, indoor
unit address, central control
address, and other settings
Detailed settings 8. Detailed settings
Automatic address setting
based on command from the
wired remote controller
When settings are
made from a remote
controller, the indoor
unit where that
remote controller is
connected stops.
Entire system stops.Automatic address 9. Auto address Automatic reset
Servicing check
display
Alarm history display 6. Service check
nanoe™ X
(CZ-RTC5A /
CZ-RTC5B only)
Display status of nanoe™ X 13. nanoe
The remote controller includes a number of servicing functions. Use these as needed for test runs and
inspections.
<CZ-RTC4>
List of Servicing Functions
Functions Description Button operation Reset operation Unit status
Test run
Operation with forced
thermostat ON
Press the
button.
Current operation
is maintained.
Sensor
temperature
display
Temperature display
from each sensor
Servicing
check display
Alarm history display
Simple
settings
Filter lifetime, operating
mode priority, central
control address, and
other settings
When settings
are made from a
remote controller,
the indoor unit
where that remote
controller is
connected stops.
Detailed
settings
System address, indoor
unit address, central
control address, and
other settings
Auto address
Auto address setting
based on command
from the wired remote
controller
Automatic reset
Entire system
stops.
Address
change
Change of indoor unit
address
Press the
button.
Press and hold the button for
4 seconds or longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the , and
buttons for 4 seconds or
longer.
Press and hold the and
buttons for 4 seconds or longer.
Press and hold the and the
timer operation buttons for 4
seconds or longer.
Press and hold the and the
timer operation buttons for 4
seconds or longer.
SM830258-01_欧州向け_1fan_mini_VRF.indb 18 18/02/09 18:58:53
To Next Page
Loading...
