Panasonic S-45MF3E5AN User Manual (English)

Other manuals for Panasonic S-45MF3E5AN

Questions and Answers:

T
tammypottsAug 18, 2025
Why is my Panasonic S-45MF3E5AN Air Conditioner not cooling properly?
- T
  Terri WarrenAug 18, 2025
  Several factors can cause poor cooling or heating performance in your Panasonic Air Conditioner. Check if the air intake or discharge port of the indoor and outdoor units is clogged with dust or other obstructions and remove any you find. Ensure the fan speed isn't set too low; change it to 'Medium' or 'High'. Other causes might be direct sunlight exposure, open doors or windows, too many heat sources or people in the room.
J
Jessica CohenAug 20, 2025
Why does my Panasonic S-45MF3E5AN Air Conditioner fan keep running after I turn it off?
- S
  stewartmichaelAug 21, 2025
  The fan may continue to rotate after the operation stops to dry the heat exchanger, depending on the setting. This is normal and ensures smooth operation.
R
Raymond ConnerAug 23, 2025
What to do if my Panasonic Air Conditioner won't turn on?
- C
  Carlos GardnerAug 23, 2025
  If your Panasonic Air Conditioner doesn't turn on even though the power is on, first press the ON/OFF operation button on the remote controller again. Also, make sure the operation button is switched on. If the breaker has been tripped, consult your dealer without turning it on. If a fuse has blown out, consult your dealer.
A
Andrea DiazAug 26, 2025
How to improve cooling performance of Panasonic Air Conditioner?
- R
  ramirezkimberlyAug 26, 2025
  To enhance the cooling performance of your Panasonic Air Conditioner, start by removing any dust or obstructions from the air intake or air discharge ports of both the indoor and outdoor units. Adjust the fan speed to 'Medium' or 'High'. Also, minimize heat sources in the room and reduce the number of people present. Consider that improper temperature settings can affect the cooling, but the manual does not provide specific instructions on this.
N
nelsondeniseAug 28, 2025
Why is my Panasonic S-45MF3E5AN not operating immediately after turning it on?
- N
  Nicholas HarperAug 28, 2025
  The unit does not start immediately because the compressor protection circuit is activated for approximately the first 3 minutes.
T
Todd KhanAug 30, 2025
Why does the fan on my Panasonic S-45MF3E5AN continue to rotate after stopping operation with the remote controller?
- A
  Amy VillegasAug 30, 2025
  The fan continues to run because the defrost operation is in process.
W
wilsonalexanderSep 1, 2025
Why does my Panasonic S-45MF3E5AN make a cracking noise when it stops?
- J
  jeatonSep 1, 2025
  The cracking noise you hear is either the sound of drainage water flowing through the drain pipe or the sound caused by temperature changes of parts.
P
Phillip JohnsonSep 3, 2025
Why does my Panasonic S-45MF3E5AN Air Conditioner discharge dust?
- B
  Brian BensonSep 4, 2025
  The dust being discharged is due to accumulated dust inside the indoor unit.
P
Pedro FitzgeraldSep 6, 2025
Why does my Panasonic S-45MF3E5AN Air Conditioner sound like streaming water?
- J
  Jasmine PooleSep 6, 2025
  The sound you hear is the sound of refrigerant liquid flowing inside the unit.
R
Ruben HensleySep 8, 2025
Why does my Panasonic S-45MF3E5AN fan rotate faster than set?
- B
  Brian RoseSep 8, 2025
  During the initial high-speed operation (3 to 30 minutes), the fan may rotate faster than the set speed for an operation check. This confirms whether the fan motor rotation is within the range of use.