Panasonic S-50PY3E - Page 52

52
Change the value by pressing the or button.
After changing all digits, press the button and proceed to
Step (5).
(5) Select one of the Setting Data “YYYY” by pressing the
or
button.
After selecting “Set data”, press the button. (If setting
continuously, follow the procedures from Fig. A.)
If you wish to change the selected indoor unit or finish setting,
press the button twice (the display returns to Step (3)).
(6) If the
button is pressed under the display Step (3), the
following display (Detailed setting-end screen) appears.
Then select “YES” by pressing the
or button and press
the button.
(Return to normal remote controller display.)
Code no.
[ ][ ]
000001 - XXXXXX
0 X X
Set data 0001
0001
0 0 0
Code no.
000001 - XXXXXX
0 X X
Set data 0001
YYYY
0 0 0
]
Confrm
[ ][ ]
Detailed settings
[ ][ ]
Unit no.
Code no.
1-1
10
Set data 00010001
Exit detailed
settings
and restart?
YES
NO
Fig. C
Fig. D
01_330918_EU_Eng.indb 52 2021/9/9 11:26:58