To Next PageTo Next PageWhy is my Panasonic S-60PU2E5B not cooling properly?
Poor cooling or heating performance in your Panasonic Air Conditioner can occur if the air intake or discharge port of the indoor and outdoor units is blocked by dust or other obstructions. To resolve this, remove any dust or obstructions. Also, check if the fan speed is set to 'Low'; if so, change it to 'Medium' or 'High'.
What to do if my Panasonic S-60PU2E5B Air Conditioner won't turn on?
If your Panasonic Air Conditioner does not run even when the power is on, it could be due to a power failure. Press the ON/OFF operation button on the remote controller again. Alternatively, the operation button might be turned off; switch on the power if the breaker is off. However, if the breaker has tripped, it's important to consult your dealer without turning it back on. A blown fuse could also be the cause, and in that case, you should consult your dealer as well.
What to do if my Panasonic S-60PU2E5B Air Conditioner is dirty because of oil mist?
If your Panasonic Air Conditioner is installed in a restaurant or a place with a lot of oil mist, the unit inside (heat exchanger) may get dirty. In this case, cleaning is necessary. It is suggested to contact your dealer.
Why does the fan keep running after I turn off my Panasonic Air Conditioner?
If the fan in your Panasonic Air Conditioner continues to run even after you've turned it off, this is normal and intended for smooth operation.
General| Brand | Panasonic |
|---|---|
| Model | S-60PU2E5B |
| Category | Air Conditioner |
| Language | English |
Proper installation by qualified technicians is required, following provided instructions. Check voltage compatibility.
All wiring must conform to local electrical codes. Ensure proper grounding. Installation by a qualified electrician is mandatory.
Turn power on 5 hours before operation for warm-up. Keep power mains ON for continuous use.
Avoid blocking air intake/outlet, keep filter clean, and close doors/windows to prevent conditioned air escape.
Details the parts of the 4-Way Cassette (Type U2) indoor unit, including air intake, water drain, and ceiling panel.
Lists various outdoor unit models (PE2, PEY2, PE1, PEY1, PZ2) with their respective capacities and types.
Information on wireless, timer, and high-spec wired remote controllers, including their model numbers.
Consult dealer/service center when filter indicator appears. Clean filter regularly for optimal performance.
Clean indoor unit with a soft cloth. Outdoor unit coils and components require periodic cleaning by a dealer/service center.
Diagnose indoor unit problems like noise, odors, fog, airflow issues, dust discharge, or fan speed anomalies.
Troubleshoot outdoor unit symptoms such as no operation, noise, steam emission, or continuous fan rotation.
Check power, breaker, fuses, and air intake/outlet blockages if the unit fails to start or respond.
Address poor cooling/heating by checking fan speed, temperature settings, heat sources, and room occupancy.
Details for the 4-Way Cassette (Type U2) indoor unit: capacity, power, sound levels, dimensions, and weight.
Specifications for R410A outdoor units (Europe/Oceania) for single split systems, covering various models and capacities.
Specifications for R32 outdoor units (Europe/Oceania) for single split systems, covering various models and capacities.
