To Next PageTo Next PageWhy is my Panasonic S-71PU1E5A Air Conditioner not cooling or heating properly?
If your Panasonic Air Conditioner isn't cooling or heating well, check if the air intake or outlet of the indoor and outdoor units is blocked with dust and remove any dust. You can also try setting the fan speed to “High” or “Strong”.
What to do if my Panasonic S-71PU1E5A Air Conditioner does not turn on?
If your Panasonic Air Conditioner isn't turning on, even though it's plugged in, first, press the power ON/OFF button on the remote controller. Also check the breaker. If the breaker is turned off, turn the power on. If the breaker has been tripped, consult your dealer without turning it on.
General| Brand | Panasonic |
|---|---|
| Model | S-71PU1E5A |
| Category | Air Conditioner |
| Language | English |
Covers critical warnings related to operation, maintenance, and potential hazards.
Specifies requirements for power outlets, wiring, and grounding to prevent electrical hazards.
Warns against improper cord use, modifications, and handling that could cause fire or injury.
Advises on safe usage, room conditions, and environmental impact of refrigerants.
Covers proper installation procedures and electrical wiring conforming to codes.
Details pre-operation warm-up and acceptable temperature ranges for operation.
Provides information on responsible collection and disposal of used electronics and batteries.
Lists and shows parts for U1, T2, and F1 type indoor units.
Shows different PE1 and PEY1 outdoor unit models.
Details available wireless and wired remote controllers.
Describes how heating works and the defrosting process for the unit.
Explains the function and conditions for the 'DRY' operation mode.
Details how the unit behaves and resumes operation after a power interruption.
Guides on setting airflow direction using remote controllers for vertical movement.
Explains manual adjustment of horizontal airflow vanes for T2 type units.
Instructions for adjusting airflow direction for each indoor unit via remote controller.
Procedure for setting airflow direction for all indoor units at the same time.
Instructions for cleaning the indoor unit, including flaps and air intake/outlet.
Advises consulting a dealer for periodic cleaning of outdoor unit components.
Guides on common symptoms like non-operation or poor performance and their causes.
Procedure for contacting a dealer after checking issues, and advice against self-repair.
Addresses noise from refrigerant, water, or temperature changes, and odors from dirt.
Explains fog occurrence, fan rotation after stopping, and airflow direction control.
Covers dust discharge, fan speed variations, and initial operation delays.
Details noise during heating and continuous fan operation after stopping.
