Why is my Panasonic Air Conditioner not cooling or heating properly?
If your Panasonic Air Conditioner isn't cooling or heating well, check if the air intake or discharge ports of the indoor and outdoor units are blocked by dust or other obstructions. Remove any dust or obstructions you find. Also, check that the wind speed isn't set to 'Low'; change it to 'High' or 'Strong'.
What to do if Panasonic Air Conditioner does not turn on?
If your Panasonic Air Conditioner doesn't turn on even when powered, first, press the ON/OFF button on the remote control again. If that doesn't work, check if the breaker is turned off and switch it on. If the fuse is blown, consult your dealer.
Why does my Panasonic S-71PN1E5 Air Conditioner smell?
Your Panasonic Air Conditioner might smell because indoor odor components like cigarette or cosmetic odors have accumulated and are being discharged. It could also be due to a dusty unit inside. In both cases, it is recommended to consult your dealer.
Why is my Panasonic Air Conditioner emitting fog?
If your Panasonic Air Conditioner is emitting fog, it could be due to a dirty heat exchanger inside the unit, requiring cleaning. Also, fog can appear during defrost operation. If the unit inside (heat exchanger) is dirty, consult your dealer as technical engineering is required.
Why does the fan on my Panasonic S-71PN1E5 keep running after I turn it off?
The fan in your Panasonic Air Conditioner may continue to rotate after operation stops to ensure smooth operation or because it's drying the heat exchanger due to specific settings.
Why won't the wind direction change on my Panasonic S-71PN1E5?
The wind direction on your Panasonic Air Conditioner may not change because when the air discharge temperature is low or during defrost operation, horizontal wind flow is made automatically. Also, the flap position may occasionally be set up individually.
Why does the flap operate several times and stops at designated position when I change the wind direction on my Panasonic S-71PN1E5 Air Conditioner?
When the wind direction is changed, the flap operates after searching for a standard position.
Why is there dewdrop on my Panasonic S-71PN1E5?
Indoor moisture is cooled by cool wind and accumulated by dewdrop.
Why is my Panasonic S-71PN1E5 discharging dust?
Dust accumulation inside the indoor unit is being discharged.
Why does the fan on my Panasonic Air Conditioner rotate faster than the setting speed at the initial high-speed operation?
This happens for operation check in order to confirm whether the fan motor rotation is within use range.
Symbol indicating hazard for severe personal injury or death.
Symbol indicating hazard for personal injury or property damage.
Avoid installation in areas with fumes, flammable gases, or high heat.
Prevent corrosion by avoiding salty sea air or sulphurous air near the unit.
Ensure power mains are ON 5 hours prior to system warm-up.
Stop operation and disconnect power immediately if any abnormality occurs.
For use by trained users; avoid operating via mains switch.
Specifies indoor and outdoor temperature ranges for cooling and heating.
Instructions for proper disposal of old electrical equipment and batteries.
Identifies key components of various indoor unit types.
How to change airflow direction using the FLAP button.
Steps to activate the automatic swing operation for airflow.
How to stop the flap swing operation at a desired position.
Details the function and limitations of the DRY operation mode.
Discusses factors affecting heating efficiency, especially in cold weather.
Describes the defrosting process and associated indicators.
Instructions and warnings for cleaning the indoor and outdoor units.
Lists symptoms and causes for common indoor unit issues.
Lists symptoms and causes for common outdoor unit issues.
Technical specifications for the 4-Way Cassette (U1 type) units.
Technical specifications for the 4-Way Cassette 60x60 (Y1 type) units.
Technical specifications for the Low Silhouette Ducted (F1 type) units.
Technical specifications for the Ceiling (T1 type) units.
Technical specifications for the Wall Mounted (K1 type) units.
Technical specifications for the Ducted (N1 type) units.
Technical specifications for the Single Split Outdoor Units.
General| Cooling Capacity | 7.1 kW |
|---|---|
| Heating Capacity | 8.0 kW |
| Refrigerant | R32 |
| Coefficient of Performance (COP) | 4.0 |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split System Air Conditioner |
To Next Page
