Why is the outdoor unit fan on my Panasonic S-71PN1E5 still running after I turn it off with the remote?
- KKyle ThompsonSep 8, 2025
Fan rotating makes operation smoothly.
Why is the outdoor unit fan on my Panasonic S-71PN1E5 still running after I turn it off with the remote?
Fan rotating makes operation smoothly.
Why does my Panasonic Air Conditioner smell bad?
If you notice an odor from your Panasonic Air Conditioner, it could be due to indoor odor components, cigarette odor, or cosmetic odors accumulated inside the unit, or the unit might be dusty. Consult your dealer.
Why does the fan keep running on my Panasonic Air Conditioner after I turn it off?
The fan in your Panasonic Air Conditioner may continue to rotate after operation stops to ensure smooth operation. Also, the fan may sometimes rotate to dry the heat exchanger due to specific settings.
Why is there fog coming from my Panasonic S-71PN1E5 Air Conditioner?
If fog occurs during cooling mode with your Panasonic Air Conditioner, cleaning is necessary because the unit inside (heat exchanger) is dirty. Consult your dealer as technical engineering is required.
Cooling Capacity | 7.1 kW |
---|---|
Heating Capacity | 8.0 kW |
Refrigerant | R32 |
Coefficient of Performance (COP) | 4.0 |
Power Supply | 220-240 V, 50 Hz |
Type | Split System Air Conditioner |
Symbol indicating hazard for severe personal injury or death.
Symbol indicating hazard for personal injury or property damage.
Avoid installation in areas with fumes, flammable gases, or high heat.
Prevent corrosion by avoiding salty sea air or sulphurous air near the unit.
Ensure power mains are ON 5 hours prior to system warm-up.
Stop operation and disconnect power immediately if any abnormality occurs.
For use by trained users; avoid operating via mains switch.
Specifies indoor and outdoor temperature ranges for cooling and heating.
Instructions for proper disposal of old electrical equipment and batteries.
Identifies key components of various indoor unit types.
How to change airflow direction using the FLAP button.
Steps to activate the automatic swing operation for airflow.
How to stop the flap swing operation at a desired position.
Details the function and limitations of the DRY operation mode.
Discusses factors affecting heating efficiency, especially in cold weather.
Describes the defrosting process and associated indicators.
Instructions and warnings for cleaning the indoor and outdoor units.
Lists symptoms and causes for common indoor unit issues.
Lists symptoms and causes for common outdoor unit issues.
Technical specifications for the 4-Way Cassette (U1 type) units.
Technical specifications for the 4-Way Cassette 60x60 (Y1 type) units.
Technical specifications for the Low Silhouette Ducted (F1 type) units.
Technical specifications for the Ceiling (T1 type) units.
Technical specifications for the Wall Mounted (K1 type) units.
Technical specifications for the Ducted (N1 type) units.
Technical specifications for the Single Split Outdoor Units.