Panasonic S-73MF2E5A - Airflow Direction Adjustment; Vertical Airflow Control; Horizontal Airflow Control

6
AdjustingAirowDirection

Using the wireless remote controller

Using the timer remote controller
Press / to select your desired airow direction.

Flap swing motion
Display when swing operation
is stopped
z
Pressing the button during
swing operation can stop the
ap at the desired position.

Flapxed(5 levels)
Recommendedverticalairowdirection
z
Set the ap to the downward position for heating operation.
(With the upward setting, warm air cannot reach the oor.)
z
Set the ap to the upward position for cooling operation.
(With the downward setting, condensation may drip on to the
oor.)
U1, T2 type
HEAT COOL / DRY FAN
Airow direction
display
Airow direction display
“FLAP” button
“FLAP” button
Fan and
heating
Cooling and
drying
(5 levels) (3 levels)
Recommended
Recommended
Fixed to this
position

Adjustingthehorizontalairowdirection
(Manual: T2 type only)
Move the horizontal airow vanes
by hand for adjustment.
This section is described in the instruction manual supplied with the timer remote contoller (CZ-RTC2).
Regarding the High-spec Wired Remote Controller (CZ-RTC3), refer to the Operating Instructions supplied with the model CZ-RTC3.
Adjusting the upward and downward motion of airow direction (U1 and T2 types only)
OI_F569617_EU_L.indb 6 2013-12-17 17:57:42