Slide 39
2 Blink Error Code
These conditions can cause the TV to shutdown and the power LED to blink 2 time
The IC8000 monitors the 15V line.
P15V is applied to A board via P6/A6(A6A) connector. P15V is applied to SC board and SS board .
In this situation P15V is monitored by IC8000. If P15V/P3.3V is missing, IC8000 will start LED 2
times blinking.
5.SOS Detect Circuit Explanation (6)
IC8000
Standby
uCOM
System
uCOM
P(PSS)
A
A6(A6A)
SOS 2
P6
P15V
P15V
AM16(Paragon)
W2(sLD8)
TC-P42/50/55/60/65S60
TC-P50/55/60/65ST60
To Next Page
Loading...
