Do you have a question about the Panasonic SA-AKX16 and is the answer not in the manual?
Type | Mini Hi-Fi System |
---|---|
Bluetooth | Yes |
CD Player | Yes |
Number of Discs | 1 |
USB Playback | Yes |
FM Radio | Yes |
Outputs | Headphone Jack |
Speakers | 2-way speakers |
Frequency Response | 20 Hz - 20 kHz |
Playable Media | CD, CD-R/RW |
Tuner | FM |
Audio Input | Yes (AUX) |
Inputs | Auxiliary Input |
General safety advice for servicing, including handling electrical hazards and protective measures.
Cautions to avoid short-circuiting and recommendations for power restoration after repairs.
Lists critical safety parts marked with 'A' and their importance in preventing hazards.
Techniques to prevent damage to sensitive electronic components from static electricity.
Cautions regarding hazardous laser radiation exposure and handling of the laser diode.
Specific care instructions for handling the optical pickup unit and traverse mechanism to prevent damage.
Methods for grounding to prevent static discharge damage, especially to the optical pickup.
Procedure to perform a cold-start or initialize the unit to shipping mode.
Details on entering and using diagnostic modes like Doctor Mode and EEPROM checksum check.
Further tables detailing diagnostic modes like Volume Setting Check, FL Display Check, Traverse Test, and Loading Test.
Details on CD Self-Adjustment Test and CD LSI Version Check within the diagnostic modes.
Process flow charts for aging tests of the CD mechanism unit, including loading and traverse tests.
Information on entering self-diagnostic mode and its functions like error code retrieval.
Tables listing power supply and CD mechanism error codes with diagnostic contents and descriptions.
Diagrams showing the locations of major internal components and printed circuit boards within the unit.
Procedures for checking and testing the Panel and LCD circuit boards after disassembly.
Steps for checking and repairing the Main PCB, focusing on side B, after component removal.
Detailed steps for checking and repairing the Main PCB, focusing on side A, after reassembly of components.
Schematic diagram for the MAIN PCB's CD servo circuit, showing component connections and signal paths.