Panasonic SA-PT650P - Page 44

9.4.2. Service Mode Table 2
FL Display
Key Operation
Front Key
Item
DescriptionMode Name
RF Channel
Selection
Display
RF Channel 1 Display*
FL Display sequence:
Display 1 2 3
RF Channel 2 Display*
FL Display sequence:
Display 1 2 3
Auto RF Channel Display*
FL Display sequence:
Display 1 2 3
*Note: This mode is for purpose of disabling/enabling the frequency of automatic
*Note:
This
mode
is
for
purpose
of
disabling/enabling
the
frequency
of
automatic
allocation and be able to select a fixed
allocation
and
be
able
to
select
a
fixed
RF channel (channels 1, 2 or 3).
RF
channel
(channels
1,
2
or
3).
After 2 seconds.
(Display 1)
(Display 2)
(Display 3)
After 2 seconds.
Main room is in AUX mode.
Main room is in AUX mode.
Main room is in AUX mode.
Main room is in AUX mode.
Press and hold [STOP]
button on the main unit,
and [4] button on the
remote control unit.
Press and hold [STOP]
button on the main unit,
and [5] button on the
remote control unit.
After 2 seconds.
Press and hold [STOP]
button on the main unit,
and [6] button on the
remote control unit.
After 2 seconds.
Press and hold [STOP]
button on the main unit,
and [7] button on the
remote control unit.
(Display 2)
(Display 1)
(Display 3)
(Display 2)
(Display 1)
(Display 3)
(Display 2)
(Display 1)
(Display 3)
RF Channel 3 Display*
FL Display sequence:
Display 1 2 3
44
SA-PT650P / SA-PT650PC