12
VQT5F80
∫ When the connecting devices have an HDMI terminal
≥ When connecting to a device that outputs 4K signals, connect an HDMI cable to the HDMI1 IN terminal of the unit.
≥ HDMI standby pass-through
Even if this system is in standby mode, the audio and/or video signal from the device connected to the HDMI1 IN or HDMI2
IN terminal will be sent to the TV connected to the HDMI AV OUT terminal (the sound will not be output from this system).
Even while the unit is in the standby mode, you can change the input signal HDMI1 IN or HDMI2 IN by pressing [SELECTOR]
on the remote control.
∫ When the connecting devices do not have an HDMI terminal
Other device connection
AV I N
(ARC)
AV O U T
AV O U T
e.g.,
Set Top Box, etc.
Video game, etc.
HDMI cable
(not supplied)
HDMI cable
(not supplied)
e.g.,
Optical digital audio cable
(not supplied)
Set Top Box, etc.
SC-BTT885&505EB-VQT5F80_mst.book 12 ページ ２０１４年３月１９日 水曜日 午後４時５０分
To Next Page
Loading...
