EasyManua.ls Logo

Panasonic SC-DK2 - Page 60

Panasonic SC-DK2
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Beforerequestingservice,makethebelowchecks.Ifyoucan'tfixtheunitasdescribedbelow,orifsomethingnotlistedhereoccurs,refertothe
encloseddirectorytolocateanAuthonzedServiceCenterconvenienttoyouorcontactyourdealer.
For detailed Instructions, contact an authorized servlcenter In the U.S.A..
In the U.S.A., carl 1-800-211-7262, e-mall consumerproducts@paneeonic.com, or visit www.panasonic.com
Reference pages are shown as black circled numbers Q.
Common Problems
NO _nd.' Turn ills v_s:up,
The speaker cab es may be shorted. Turn the unit off check and correct the connections and turn
z :' n
....... the ur_o .0,
Check the speaker connections. O,
Sound is unfixed, reversed or
comes from one speaker only.
Humming heard during play.
- i
"ERROR" is displayed.
"DTS NO AUDIO" is displayed.
"DVD H0[_" Is displayed.
l ([3[_will be numbers.)
An AC power supply cord or fluorescent light is near the cables. Keep other appliances and cords
away from this unit's cables.
If possible jn your area, turn the AC power supply cord's plug or connector over io reverse the
plug's polarity.
Incorrect operation performed, Read the instructions and try again,
You Plugg_ the power supply cord in for the first time Or there wasa _wer failure recently.
t _
e
Check and correct the speaker cords connection.
if this does not fix the problem, there is a power supply problem. Consult the dealer.
This unit is unable to decode DTS signals.
Tlte mdiL_ _ with a soft cloth; ,, _.
A problem has occurred. Turn the unit off end unplug the AC power supply cord. Wait a moment
and then plug the cord in and turn on the unit again. If the unit is stillnot working correctly, consult
your dealer.
Listening to the radio
When there is e television set nearby
The picture on the TV disappears The location and orientation of the antenna are incorrect• If you are using an indoor antenna.
or stripes appear on the screen, change to an outdoor antenna.
The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit.
)
RQT5327
Using the cassette deck
..... _ i_ .... . :
It the erasure prevention tabs have been removed, cover the holes with adhesive tape.

Related product manuals