5
TQBJ2179
16 Select number
≥ To select a 2-digit number
Example: 16: [S10]
> [1] > [6]
≥ To select a 3-digit number
Example: 124: [S10]
> [S10] >[1] > [2]> [4]
17 Delete a programed track
18 Enter sound menu
19 Set the play menu item
20 Change the displayed information
21 Clock and timer operation
22 Set the program function
23 Mute the sound
Press again to cancel. “MUTE” is also canceled when the
volume is adjusted or the unit is turned off.
24 Select preset EQ
25 Enter setup menu
26 Set the radio menu item
27 Selection/OK
28 Dim the display panel and indicator
Press again to cancel.
Using the remote control
Insert the battery so the terminals (i and j) match
those in the remote control.
Point it at the remote control signal sensor on this unit.
≥ To avoid interference, please do not put any objects in front
of signal sensor.
Connections
1 Connect the antenna.
2 Connect the AC power supply cord after all other
connections are completed.
This unit consumes a small amount of AC power
(l 16) even when turned off.
≥ In the interest of energy conservation, if you will not be
using this unit for an extended period of time, unplug it
from the AC outlet.
≥ Some settings will be lost after you disconnect the
system. You have to set them again.
≥ Tape the antenna to a wall or column in a position with the
least amount of interference.
≥ If radio reception is poor, use an outdoor antenna (not
supplied).
EXT-IN
3
16
17
4
5
9
19
18
20
21
22
6
23
25
26
24
27
28
7
(Alkaline or manganese
battery)
Adhesive tape
(not supplied)
FM indoor antenna
(supplied)
To an AC outlet
AC power supply cord (supplied)
SC-HC410PC-TQBJ2179_Eng.book 5 ページ ２０１９年２月１５日 金曜日 午前１０時５９分
To Next Page
Loading...
