VQC8935-1
Quick Start Guide
Home Theater Audio System SC-HTB20
Step 1: Choose in the configuration that is right for you
Place the speakers
horizontally
Place the speakers
vertically
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
To prevent damage or scratches, lay down a soft cloth
and perform the assembly on it.
2
4
1
3
Push
Insert the wire fully while
pushing the lever.
r: White
s: Blue line
Insert the wire fully
while pushing the
lever.
r: White
s: Blue line
Push
Pull the cable straight along
the line and slide into the
groove.
≥ Be sure to place the cable under
the projecting part.
Front view Rear view
Push
≥ Place the speaker that is connected with the speaker cable with a red connector on the observers’ right, and connect
with the speaker cable with a white connector on the observers’ left.
until
2012/3/13
SC-HTB20EBEGGNGS~ESG_mst.fm 5 ページ ２０１２年３月７日 水曜日 午前１１時１８分
To Next Page
Need help?
General
Weight and Dimensions
