Panasonic SC-HTB400 User Manual

9
TQBJ2216
Connection with players, etc., supporting HDR10+ [HTB600]
This system does not support HDR10+. When connecting to a player, TV, etc., that supports HDR10+,
use the following connection.
* Make sure to connect the HDMI cable to eARC/ARC compatible terminals.
Note:
• The name of the terminal may be different depending on the device that supports HDR10+. Refer to the operating instructions
of the supporting device for details.
• If you connect this system and are then unable to view Netflix, use the above connection.
Connection from an HDMI compatible device [HTB600]
You can direct the audio signal from the connected Blu-ray Disc player, DVD player, Set Top Box, etc. to
this system.
Note:
• Refer to the operating instructions of the connected HDMI compatible device for the necessary setting, to output the video and
audio signals.
• This system supports HDR video formats such as HDR10, HLG, and Dolby Vision.
[HTB600]
HDMI IN (ARC)
HDMI IN
HDMI
VIDEO OUT
HDMI
AUDIO OUT
TV
Player, etc.,supporting HDR10+
HDMI
cable
HDMI cable
HDMI cable*
HDMI OUT
[HTB600]
HDMI cable
e.g.,
Blu-ray Disc player
htb600.400_TQBJ2216_en.fm Page 9 Thursday, May 14, 2020 2:22 PM

Panasonic SC-HTB400 Specifications

General

RMS rated power	160 W
Audio output channels	2.1 channels
Woofer diameter	80 mm
Full-range driver diameter	100 mm
Wi-Fi	No
Bluetooth	Yes
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Display type	LED
Product color	Black
TV stand usage	-
Number of products included	1 pc(s)
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Soundbar power consumption	30 W
Harmonized System (HS) code	85182200

Weight and Dimensions

Depth	120 mm
Width	962 mm
Height	56 mm
Cord length	1.5 m
Soundbar weight	3500 g