EasyManuals Logo

Panasonic SC-HTB400 User Manual

Panasonic SC-HTB400
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
TQBJ2216
Placement
Safety Precautions
Note:
Do not hold the main unit in one hand to avoid injury, you may drop the main unit when carrying it.
To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Do not put the system in a metal cabinet.
Keep magnetised items away. Magnetised cards, watches, etc., can be damaged if put too near to the system.
[HTB600]
Place the active subwoofer within a few meters from the main unit and in a horizontal position with the top panel facing upward.
Depending on the position of the active subwoofer, the effect may vary.
Placing the active subwoofer too close to the walls and corners can result in excessive bass. Cover walls and windows with
thick curtains.
You may change the position of the active subwoofer, or adjust the subwoofer level (~18) to achieve optimum effect.
Wireless interference
Interference may occur if you are using other devices (wireless LAN/microwave ovens/cordless phones,
etc.) that use the 2.4 GHz frequency band, causing some communication problems (sound is interrupted,
sound skips, there is a lot of noise, etc.).
If this happens, separate the other electronic equipment from the main unit and active subwoofer so that
interference does not occur.
Professional installation is required.
The installation should never be done by any other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY DAMAGE AND/OR SERIOUS INJURY, INCLUDING
DEATH RESULTING FROM IMPROPER INSTALLATION OR INCORRECT HANDLING.
Be sure to install the main unit as indicated within this operating instructions.
Attach using techniques suited to the structure and materials of the installation location.
Caution
This system is to be used only as indicated in these instructions. Failure to do so may lead to damage
to the amplifier and/or the speaker, and may result in the risk of fire. Consult a qualified service
person if damage has occurred or if you experience a sudden change in performance.
Do not attempt to attach the main unit to a wall using methods other than those described in this
manual.
When carrying the active subwoofer [HTB600]
Do not hold the active subwoofer from this opening.
The parts inside may get damaged.
Always hold the bottom of the active subwoofer when moving it.
htb600.400_TQBJ2216_en.fm Page 11 Thursday, May 14, 2020 2:22 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic SC-HTB400 and is the answer not in the manual?

Panasonic SC-HTB400 Specifications

General IconGeneral
RMS rated power160 W
Audio output channels2.1 channels
Woofer diameter80 mm
Full-range driver diameter100 mm
Wi-FiNo
BluetoothYes
Bluetooth version4.2
Connectivity technologyWired & Wireless
Display typeLED
Product colorBlack
TV stand usage-
Number of products included1 pc(s)
AC input voltage220 - 240 V
AC input frequency50 Hz
Soundbar power consumption30 W
Harmonized System (HS) code85182200
Weight and Dimensions IconWeight and Dimensions
Depth120 mm
Width962 mm
Height56 mm
Cord length1.5 m
Soundbar weight3500 g

Related product manuals