6
VQT4U60
Control reference guide
This system consists of the CD unit and the speaker unit. The both units are wirelessly connected when turned
on.
∫ CD unit
∫ Speaker unit
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa.
In standby mode, the unit is still consuming a small
amount of power.
≥ The CD unit and the speaker unit operate
simultaneously. Press either standby/on switch
to turn both units on or to standby mode.
Refer to page 23 when the units do not turn on
simultaneously.
2 Select the audio source
“CD”
---------.
“FM”
----------.
“BLUETOOTH”
----------.
“AUX”
^
“IPOD_PORT” / “USB”(
“IPOD_DOCK”(b
3
Basic playback control buttons
4 iPod port for iPod/iPhone/iPad and USB devices
(l 5, 9)
5 Adjust the volume (0 (min) to 50 (max))
6 Network setup button (l 11)
7 Standby/on indicator
While this system is turned on:
The indicator lights in green when the CD unit and
the speaker unit are connected successfully, blinks
in green when they are connecting, and lights in
red when they fail to connect.
8 Display
9 Open the CD lid
10 Dock for iPod/iPhone with Lightning connector
(l 9)
11 Remote control signal sensor
Distance: Within approx. 7 m directly in front.
≥ To avoid interference, please do not put any objects in
front of signal sensor.
12 WPS pairing button (l 10)
13 Wi-Fi
®
status indicator
− VOLUME ＋
SC-NE5~VQT4U60.book 6 ページ ２０１３年１月２２日 火曜日 午後１時３８分
To Next Page
Loading...
Need help?
General