T
Timothy BrownAug 21, 2025
What to do if the Panasonic Stereo System remote control doesn't work?
- DDaniel SmithAug 22, 2025
First, ensure the batteries are correctly inserted. If the remote still doesn’t work, replace the batteries.
To Next PageTo Next PageWhat to do if the Panasonic Stereo System remote control doesn't work?
First, ensure the batteries are correctly inserted. If the remote still doesn’t work, replace the batteries.
Why is there no sound coming from the speakers of my Panasonic Stereo System when using iPod?
The iPod may not be correctly inserted into the dock. Turn off the iPod, remove it from the dock connector, reinsert it, and turn it on again. Also, make sure that the iPod is actually playing something. Adjust the volume as needed.
Why won't my iPod turn on when connected to the Panasonic SC-PM38DB?
Verify that the iPod battery is not depleted before connecting it to the unit. Before inserting your iPod into the dock, turn off both the unit and iPod. Power on the unit and select the appropriate source.
What does 'ERROR' displayed on my Panasonic SC-PM38DB mean?
The “ERROR” message indicates an incorrect operation was performed. Read the instructions and try again.
Why is there a humming sound during playback on my Panasonic SC-PM38DB Stereo System?
A humming sound may occur if an AC mains lead or fluorescent light is near the cables. Keep other appliances and leads away from the unit’s cables. If possible, turn the AC mains lead’s plug or connector over to reverse the lead’s polarity.
What does 'STATION FULL' mean on Panasonic SC-PM38DB and how to fix it?
DAB station memory is full. Use the following method to clear station memory:1. Press [DAB MENU]. 2. Press [e,r] to select “STATION CLEAR”. 3. Press [OK]. “OK? Push OK” is displayed. 4. Press [OK]. Station memory is erased, and the unit automatically begins Auto scanning.
What to do if sound is reversed or only coming from one speaker on Panasonic SC-PM38DB Stereo System?
Check the speaker connections.
What to do if the Panasonic Stereo System display is wrong or play won't start?
The disc may be upside down. Alternatively, try wiping the disc. If the issue persists, the disc may be scratched, warped, or non-standard. Condensation may have formed inside the unit due to a sudden change in temperature; wait about an hour for it to clear and try again.
How to fix no sound on Panasonic SC-PM38DB?
First, check that the volume is turned up. Also, the speaker cords may not be connected properly. Turn the unit off, check and correct the connections, and then turn the unit back on.
General| Brand | Panasonic |
|---|---|
| Model | SC-PM38DB |
| Category | Stereo System |
| Language | English |
Steps for connecting speaker cables, FM antenna, DAB antenna, and AC mains lead.
Instructions for connecting FM and DAB outdoor antennas for improved reception.
Guidance on inserting batteries, handling, and using the remote control.
How to activate and deactivate the product demonstration mode.
Details of buttons and ports on the main unit of the CD stereo system.
Explanation of buttons and functions available on the remote control.
Instructions for playing standard audio CDs and MP3 discs.
Options for selecting playback modes like single track, album, or random.
How to display track information like elapsed time, remaining time, and artist name.
Features for advanced disc playback, including repeat and program play.
Steps to manually select FM radio stations by frequency.
How to store and recall up to 30 FM radio stations.
Procedure for automatically scanning and saving available FM stations.
Step-by-step guide to manually preset FM radio stations.
How to tune into stored FM radio stations using preset channels.
Explanation of DAB bands, frequencies, ensembles, stations, and services.
Understanding regional differences and memory creation for DAB reception.
Function to search for and input currently receivable DAB stations into memory.
How the unit updates station memory when names change or new stations broadcast.
Selecting favorite DAB stations from memory in alphanumeric order.
Steps to operate the DAB mode, including station tuning and selection.
Initiating an automatic scan to update DAB station memory.
Guide to presetting up to 20 DAB channels for quick access.
How to enable automatic time synchronization from DAB broadcasts.
How to tune into preset DAB stations using the preset function.
Accessing secondary audio services broadcast alongside primary DAB stations.
Information available for display: dynamic label, PTY, ensemble, frequency, time.
Monitoring and improving DAB reception by checking signal quality.
Adjusting the auto scan range for DAB stations, including UK and All Band III options.
Instructions for setting the 24-hour clock on the unit.
How to set a timer to turn the unit on at a specific time.
Setting a timer to automatically turn the unit off after a specified duration.
Changing sound effects using Preset EQ or adjusting bass and treble.
How to activate and use the surround sound effect for wider audio.
Turning the D.BASS function on or off for a more powerful bass effect.
Using the digital remaster feature for improved sound quality from CD and USB.
Instructions for connecting, charging, and playing music from an iPod.
Detailed steps for controlling iPod playback using the unit's remote and main unit.
Connecting and playing MP3 files from USB memory devices.
How to display track information for USB playback.
Procedure to change the remote control code to avoid interference with other equipment.
Solutions for common issues like no sound, humming, or error messages.
Troubleshooting tips for radio reception issues like noise or distorted sound.
Resolving picture disruption or stripes on TV caused by the unit.
Troubleshooting disc playback errors, including display issues or failure to start.
Solutions for when the remote control is not functioning correctly.
Troubleshooting specific issues related to iPod connectivity and playback.
Resolving problems with USB drive readability and file playback.
Troubleshooting DAB reception, data, scrambling, no service, and scan failed errors.
Technical details of the amplifier, including power output and terminals.
Specifications related to CD playback, including disc types and file formats.
Details on FM tuner capabilities, presets, and frequency range.
Technical specifications for DAB reception, bands, and frequencies.
Information on USB compatibility, supported file formats, and port power.
Specifications for the included speakers, including type, impedance, and dimensions.
General specifications like power supply, dimensions, mass, and operating conditions.
Instructions on how to clean and maintain the unit's surfaces.
Guidelines for safely placing the unit to ensure proper ventilation and stability.
Precautions regarding the use of appropriate voltage sources.
Safety instructions for connecting and handling the AC mains lead.
Warnings about preventing foreign objects and liquids from entering the unit.
Instructions on when and how to seek professional service for the unit.
Laser safety warning and precautions against unauthorized access or repair.
General cautions regarding installation, ventilation, and battery disposal.
Warnings to reduce the risk of fire, electric shock, or product damage.
