Control reference guide
..-----+--1@
Panasonic
® [DVD]: Select disc as the source
(~
12): DVD/CD
[FMlAM]: Select FM/AM tuner
(~
13,29)
[>, < SELECT]: Select FM/AM tuner
or
external audio as the
source
(~
30)
DVD/CD--->FM-->AM-->AUX-.D-IN-.IPOD
t I
The below function is available only when using the optional
Panasonic wireless sound system SH-FX85.
[-2ND
SELECT]: Press and hold the bullon to change the source
for the second room;
MAIN SOURCE (follows the selected source for the main room}-+
(FM-->AM)--.IPOD---> Return to MAIN SOURCE
- If the main room is in FM/AM mode, you can only select the same
mode for the FM/AM tuner of the second room.
For details, refer to the operating instructions for the optional
Panasonic wireless sound system SH-FX85.
CD
Turn the main unit on/off (
...
12)
@ Select channels and title numbers etc. / Enter numbers
("'13,17)
@ Select a disc / Play all loaded CDs sequentially (
...
17,
18)
@ Select preset radio stations (
...
29)
® Basic operations for play (
...
16,17)
® Show setup menu (
...
12)
(J)
Show a disc top menu or program list (
...
17, 19)
® Select or confirm menu items / Frame-by-frame (
...
17)
® Show a disc menu
or
play list (
...
17, 19)
@)
Select sound mode (
...
28)
@ Turn Dolby Pro Logic
II
on/off (
...
28)
@
Cancel
("'18)
@ Turn Whisper-mode Surround on/off (
...
28)
or
Set the Sleep timer
Press and hold
[-SLEEP].
While the time is shown
on
the main unit's display, press
[-SLEEP]
repeatedly.
SLEEP 30->SLEEP 60->SLEEP 90->SLEEP120
t OFF (Cancel) ( I
•
To
confirm the remaining time, press and hold the button again.
@ TV operations
Aim the remote control at the Panasonic TV and press the button.
[<!>
TV]: Turn the TV on/off
[TVNIDEO]: Change the TV's video input mode
[+,
-]:
Adjust the TV volume
This may not work properly with some models.
@ Select iPod as the source (
...
30)
@ Adjust the volume of the main unit
@ Select radio stations manually (
...
29)
@ Start up and
playa
disc automatically (
...
17,
26)
@)
Show START menu (
...
15)
@ Show on-screen menu (
...
20)
@ Return to previous screen (
...
17)
@ Switch information on the main unit's display ( 17)
@ Select the play mode / Set the repeat mode ( 18)
@ Mute the sound
• "MUTING" flashes on the main unit's display while the function is
on.
•
To
cancel, press the bullon again or adjust the volume.
• Muting is canceled when you switch the unit to standby.
@ Adjust the subwoofer level or select speaker channel
(
...
29)
Avoiding
lntel18renCEt\'!flthothe'rP8J,a~nic"
eci~!~~tt
:::~>;'
'::
"
.':':
"/<f.:).>,"
,.
Other Panasonic audio/video equipment may start functioning when you
operate the unit using the supplied remote control.
You
can operate this unit in another mode by setting the remote control
operating mode to "REMOTE 2".
The
main
unit
and
remote
control
must
be
set
to
the
same
mode.
1 Press and hold
[~/~~]
on the main unit and [2] on the remote
control until the main unit's display shows "REMOTE 2",
2 Press and hold [OK] and [2] on the remote control for at least 2
lO
seconds.
~
To
change the mode back to "REMOTE 1
",
repeat both steps above by
greplacing [2] with [1].
c:
III
AUTO OPERATION ON/OFF
indicator
The indicator lights red when the wireless system is turned
on
and
lights green when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
Unit
on/off
button
[POWER
A.
I,
•
<!>]
Use this bullon to turn the
wireless system
on
and off.
A.
I:
This unit is
on.
•
<!>:This
unit is off.
To Next Page
Loading...
