J
Jonathan GonzalezSep 8, 2025
What does “DVD U11” mean on my Panasonic SC-PTX5 and how to fix it?
- IiwardSep 9, 2025
The disc may be dirty. Wipe it clean.
To Next PageTo Next PageWhat does “DVD U11” mean on my Panasonic SC-PTX5 and how to fix it?
The disc may be dirty. Wipe it clean.
What to do if my Panasonic SC-PTX5 is not responding to any buttons?
If your unit isn't responding to button presses, consider these possibilities: * The unit cannot play discs other than the ones listed in these operating instructions. * The unit may not be operating properly due to lightning, static electricity or some other external factor. In this case, turn the unit off and then back on. * Condensation has formed. Wait 1 to 2 hours for it to evaporate.
How to reset forgotten ratings password on Panasonic SC-PTX5 Home Theater System?
While stopped and “DVD/CD” is the source, press and hold [?] (Stop) on the main unit and [S10] on the remote control until “Initialised” disappears from the television. Turn the unit off and on again. All settings will return to the default values.
Why does a menu screen appear during skip or search on my Panasonic Home Theater System?
This is normal for Video CDs.
What does “DVD H??” or “DVD F???” mean on my Panasonic SC-PTX5 Home Theater System and how can I resolve it?
These error codes indicate that trouble may have occurred. The numbers following “H” and “F” depend on the status of the unit. You can try to turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. If the service numbers fail to clear, note the service number and contact a qualified service person.
Why doesn't the VIERA Link “HDAVI Control” function respond on my Panasonic Home Theater System?
Depending on the condition of the home theater system or the connected equipment, it may be necessary to repeat the same operation so that the function can work correctly.
What does “D.MIX” flashing mean on my Panasonic Home Theater System when playing a DVD-A?
If “D.MIX” is flashing on your Panasonic Home Theater System during DVD-A playback, it indicates that down-mixing is in progress. This is when the 5.1 channel sound is being remixed into two channels. The disc contains single-channel or 5.1 channel signals which may not be reproduced authentically.
What does “U70?” mean on my Panasonic Home Theater System?
The “U70?” error message on your Panasonic Home Theater System can indicate a few potential HDMI connection issues. The connected equipment may not be HDMI-compatible. Ensure you are using HDMI cables that have the HDMI logo. The HDMI cable might be too long or damaged.
Why are folders on a data CD not displayed correctly on my Panasonic Home Theater System?
Folders deeper than the eighth layer are displayed as the eighth layer.
What does "DVD U11" mean on my Panasonic SC-PTX5 and how to fix it?
The “DVD U11” error message on your Panasonic Home Theater System usually means the disc may be dirty. Try wiping the disc clean.
General| Equalizer | Yes |
|---|---|
| RMS rated power | 140 W |
| Audio output channels | 5.1 channels |
| Frequency range | 58 - 40 Hz |
| Satellite speakers RMS power | 45 W |
| Analog signal format system | NTSC |
| Disc types supported | DVD-R, DVD-RAM, DVD-RW |
| Optical disc player type | DVD player |
| Weight | 3000 g |
| Dimensions (WxDxH) | 325 x 330 x 72 mm |
| USB version | 2.0 |
| S-Video outputs quantity | 0 |
Weight and Dimensions| Center speaker weight | 4000 g |
|---|---|
| Front speaker dimensions (WxDxH) | 103 x 220 x 231 mm |
| Center speaker dimensions (WxDxH) | 178 x 425 x 257 mm |
