To Next PageTo Next PageHow to reset forgotten ratings password on Panasonic SC-PTX5 Home Theater System?
While stopped and “DVD/CD” is the source, press and hold [?] (Stop) on the main unit and [S10] on the remote control until “Initialised” disappears from the television. Turn the unit off and on again. All settings will return to the default values.
Why can't I access the Setup menu on my Panasonic SC-PTX5?
Select “DVD/CD” as the source. Also, cancel All group, Program and Random play.
Why is my Panasonic SC-PTX5 Home Theater System not turning on?
If your Panasonic Home Theater System isn't powering on, ensure the AC mains lead is securely inserted.
What does error code “F61” mean on my Panasonic SC-PTX5 and how to fix it?
Check and correct the speaker cable connections. If this does not fix the problem, consult the dealer.
Why is my Panasonic SC-PTX5 Home Theater System remote control not responding?
If the remote control isn't working, try the following: * Check that the batteries are installed correctly. * The batteries are depleted. Replace them with new ones. * Aim the remote control at the remote control signal sensor and operate.
What does “OVER CURRENT ERROR” mean on my Panasonic SC-PTX5?
The “OVER CURRENT ERROR” message on your Panasonic Home Theater System indicates that the connected USB device is drawing too much power. To resolve this, switch to DVD/CD mode, remove the USB device, and then turn the unit off.
What does "F61" error mean on my Panasonic SC-PTX5 Home Theater System and how to fix it?
The “F61” error on your Panasonic Home Theater System suggests an issue with the speaker cable connections. Check and correct these connections. If the problem persists, you should consult a dealer.
What to do if my Panasonic Home Theater System remote control isn't working?
If the remote control for your Panasonic Home Theater System isn't responding, try these steps: * Ensure the batteries are correctly installed. * Replace depleted batteries with new ones. * Aim the remote control directly at the remote control signal sensor during operation.
What does “NO DISC” mean on my Panasonic Home Theater System?
The “NO DISC” message on your Panasonic Home Theater System indicates that either a disc has not been inserted, or it has not been inserted correctly. Insert a disc properly to resolve this.
What does "ERROR" mean on my Panasonic SC-PTX5 and how to fix it?
The “ERROR” message on your Panasonic Home Theater System indicates that an incorrect operation was performed. Review the instructions and try again.
General| Equalizer | Yes |
|---|---|
| RMS rated power | 140 W |
| Audio output channels | 5.1 channels |
| Frequency range | 58 - 40 Hz |
| Satellite speakers RMS power | 45 W |
| Analog signal format system | NTSC |
| Disc types supported | DVD-R, DVD-RAM, DVD-RW |
| Optical disc player type | DVD player |
| Weight | 3000 g |
| Dimensions (WxDxH) | 325 x 330 x 72 mm |
| USB version | 2.0 |
| S-Video outputs quantity | 0 |
Weight and Dimensions| Center speaker weight | 4000 g |
|---|---|
| Front speaker dimensions (WxDxH) | 103 x 220 x 231 mm |
| Center speaker dimensions (WxDxH) | 178 x 425 x 257 mm |
