Setup for network functions
Arrows and numbers indicate pages of reference in the operating instructions.
For more information, refer to the operating instructions.
Using network functions
1 Turn on the PC and boot Windows.
2 Set the shared folder.
For further information, refer to the Windows operating
instructions or Windows “Help”.
e.g., For “Windows XP Home Edition”
1 Right click on the folder that you want to share, and
select “Sharing and Security...”.
2 Add check marks to “Share this folder on the network”
and “Allow network users to make changes to files”.
3 Make note of the “Shared Name” field.
[Necessary in step 4 (back of this sheet)]
4 Click “OK”.
3 Check the PC name.
e.g., For “Windows XP Home Edition”
From the “Start” menu, select “System” in “Control
Panel”, and click on the “Computer Name” tab, and
make note of the name given in the “Full Computer
Name” field.
(Continued on the back of this sheet)
Model No.
SC-PTX7
RQCA1657
F0407SS0
EB
Make note of the name.
ReferenceGuide.indd1ReferenceGuide.indd1 2007/04/0916:44:002007/04/0916:44:00
To Next Page
Need help?
General
