To Next PageTo Next PageWhat to do if my Panasonic Home Theater System remote control buttons are not responding?
If the remote control buttons are not responding, first, check that the battery is correctly installed. If it is, the battery may be depleted, so replace it with a new one. Ensure you are aiming the remote control directly at the remote control signal sensor on the unit.
How to reset forgotten ratings password on Panasonic SC-XH160 Home Theater System?
To reset a forgotten ratings password, reset all the settings to Factory Preset. Alternatively, while 'DVD/CD' is the source and there is no disc inserted, press and hold [< OPEN/CLOSE]2 on the main unit and [S10]2 on the remote control until 'RESET' appears on the main unit’s display. Turn the unit off and on again.
Why is there no picture or sound from my Panasonic Home Theater System?
If you're experiencing a lack of picture or sound, verify the video and speaker connections. Also, check the power and input settings of both the connected equipment and the main unit. Ensure that the disc being used has recorded content. Note that during HD JPEG playback, there will be no video output from the VIDEO OUT terminal.
Why does the picture on my Panasonic Home Theater System disappear or display incorrectly on the TV?
The unit and TV might be using different video systems, or the system used on the disc may not match your TV. Ensure the unit is directly connected to the TV and not through a VCR. Mobile telephone chargers can cause disturbance. If using an indoor TV antenna, try an outdoor antenna, and ensure the TV antenna wire is not too close to the unit. Reduce the number of connected HDMI devices. When using the HDMI AV OUT terminal, ensure an incompatible video output with the connected TV is not selected. Be aware that video images converted to 1920k1080 resolution may look different from true native 1080p full-HD sources.
What to do if my Panasonic Home Theater System buttons are not responding?
If the buttons are not responding, the unit may not be operating properly due to lightning, static electricity, or some other external factor. Try turning the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. If condensation has formed, wait 1 to 2 hours for it to evaporate.
Why does my Panasonic SC-XH160 automatically switch to standby mode?
The unit might be automatically switching to standby mode because the Sleep timer was active and reached its set time limit, or the main unit will automatically switch to standby mode after 30 minutes of inactivity.
How to display the START menu on Panasonic SC-XH160?
To display the START menu, remove the disc and then press [START]B again.
How to adjust picture size to fit the screen on Panasonic SC-XH160 Home Theater System?
To adjust the picture size, change 'TV Aspect' in the Video menu. Alternatively, use the TV to change the aspect, or change the zoom setting.
General| Speaker Type | 2.1 Channel |
|---|---|
| Bluetooth | Yes |
| USB Playback | Yes |
| FM Radio | Yes |
| DVD Player | Yes |
| HDMI Output | Yes |
| USB Port | Yes |
| Audio Input | Yes |
