76
VQT3H99
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Select the menu. (l 23)
Example of images with a 16:9 aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
The information displayed on the screen
(operation icon and time code etc.) can be
displayed on the TV.
Select the menu. (l 23)
≥ Select [OFF] to erase the information.
≥ The screen on this unit will not change.
[SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
[SETUP] # [EXT. DISPLAY] # [ON]
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ For details on how to play back, please read the operating instructions for the TV.
To Next Page
Loading...
