107
LSQT1337
“PUSH THE RESET
SWITCH.” is displayed.
≥ The unit has automatically detected an error. Remove the
SD card then press the RESET button to restart the unit.
Press the RESET button with the projecting part of the grip
belt A.
≥ If you do not press the RESET button, the power to this unit
is turned off automatically about 1 minute later.
≥ Even after you press the RESET button, the indication may
still appear repeatedly. If so, this unit needs repair. Detach
the power connected, and contact consumer support
(l 122, 123). Do not attempt to repair the appliance by
yourself.
When the SD card is
inserted in this unit, it is
not recognized.
≥ Use this unit to format SD cards. Please be aware that if an
SD card is formatted, then all the data recorded on the card
will be erased. (l 71)
When the SD card is
inserted in another
device, it is not
recognized.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card)
that you inserted. Refer to the operating instructions of the
device for details.
Problem Check points
A
SDR-H60&41&40P&PC&PL-LSQT1337_mst.book 107 ページ ２００７年１１月１２日 月曜日 午後１時４６分
To Next Page
Loading...
