Panasonic SDR-H90 - Turning the unit on;off; Selecting a mode

21
(ENG) LSQT1467
Recording
Recording
1
Before recording
It will make an optimal setting automatically depending on the objects and recording conditions.
¬Rotate the mode dial to select or .
It is automatically set to the following modes
depending on the objects and recording conditions.
≥ Due to conditions, a different mode may be
identified for the same subject.
≥ Modes are selected automatically by the unit,
so it may not choose desired mode depending
on the recording conditions.
≥ Brightness may change suddenly or flicker
when set to on.
≥ Optical image stabilizer function (l 24) is set
to on in all modes.
≥ If this is turned to on, the guideline function is
disabled.
∫ When the intelligent auto mode is
set to off
The auto mode icon [ ] appears.
Colour balance (white balance) and focusing will
be adjusted automatically.
Depending on the brightness of the subject etc.,
the aperture and shutter speed are automatically
adjusted for optimum brightness.
(When set to the video recording mode:
The shutter speed is adjusted to a maximum of
1/350.)
≥ Colour balance and focus may not be adjusted
automatically depending on light sources or
scenes. If so, manually adjust these settings.
Intelligent auto mode
Intelligent auto button
Press this button to switch on/off the
intelligent auto mode.
Mode Scene/Effect
Portrait When the object is
a person
Faces are detected
automatically, and the
brightness is adjusted
so it is recorded clearly.
Scenery Recording outdoors
The whole landscape
will be recorded vividly
without whiting out the
background sky, which
may be very bright.
Spotlight Under a spotlight
Very bright object is
recorded clearly.
Low light Dark room or twilight
It can record clearly
even in a dark room
or twilight.
Normal Other situations
Brightness and colour
balance are adjusted
automatically for
clear image.
Mode Scene/Effect
AUTO
SDR-H90&80EP-LSQT1467_mst.book 21 ページ ２００８年１２月２日 火曜日 午後２時３２分