28
LSQT1505 (ENG)
Playback
SD card
management
1
Formatting an SD card
This is for initializing SD cards.
Please be aware that if an SD card is formatted,
then all the data recorded on the card will be
erased. Store important data on a PC, etc.
1 Select the menu. (l 19)
2 When the confirmation message appears
Select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU
button to exit the message screen.
≥ During formatting, do not turn this unit off.
≥ Do not open the card slot cover while
formatting. The formatting will stop.
≥ When you format the SD card, use a battery
with sufficient battery power or the AC adaptor.
≥ Use this unit to format SD cards. If an SD card
is formatted on other products (such as a PC),
the time spent for recording may become
longer and you may not be able to use the SD
card.
≥ Depending on the type of SD card being used,
it may take time to format.
[SETUP] # [FORMAT CARD] # [YES]
SDR-S26EP-LSQT1505_mst.book 28 ページ ２００８年１２月２５日 木曜日 午前９時４分
To Next Page
Loading...
